While the role of boron (B) has been thoroughly clarified in titanium (Ti) castings, the
microstructural changes triggered in additive manufacturing (AM) are still the subject of …

Abstract “SPS pre-sintering+ SPS reactive hot extrusion”(SPSHE) is a promising technique
for manipulating the orientation of TiB whiskers (TiBw) in discontinuously reinforced titanium …

The CoCrFeNiTi x B 2x (x= 0, 0.1, 0.2, and 0.3) high entropy alloy (HEA) composite coatings
were prepared on Q235 substrates by laser cladding. The microstructure, grain orientation …

Particle-reinforced metal matrix composites (MMCs) produced using the laser powder bed
fusion (LPBF) technique have gained considerable attention because of their distinct …

In this study, the creep behavior of Ti–6Al–4V fabricated by electron beam directed energy
deposition was investigated. The results showed that the creep behavior was controlled by a …

Abstract TiB/Ti6Al4V composite was prepared using spark plasma sintering followed by
bidirectional reaction hot rolling. The TiB whiskers were synthesized in situ during the rolling …

The room and high temperature (up to 600° C) mechanical properties, with emphasis on the
fracture toughness and fatigue resistance, of an α/β titanium alloy that was additively …

To address the problems of insufficient strength and low hardness in pure titanium, a new Ti-
BC powder system was used to prepare in-situ hybrid reinforced (TiB+ TiC)/Ti composites by …

The brittle intermetallic phases in the interface of Ti6Al4V-Inconel 718 graded material limits
its application. It is of great significance to reveal the formation and transformation …

Laser powder bed fusion (LPBF) is one of the most beneficial manufacturing methods for its
precision and ability to create parts with complex geometry, although high thermal gradient …