As a non-beam-based additive manufacturing (AM) method, binder jet 3D printing (BJ3DP)
is a process in which a liquid binder is jetted on layers of powdered materials, selectively …

Additive manufacturing technologies based on melting and solidification have considerable
similarities with fusion-based welding technologies, either by electric arc or high-power …

Additive manufacturing (AM) creates digitally designed parts by successive addition of
material. However, owing to intrinsic thermal cycling, metallic parts produced by AM almost …

Corrosion of stainless steels, including the austenitic Fe-Cr-Ni alloys, is associated with MnS
inclusions that provide local sites for corrosion pits. Much research effort has been focused …

Coarse columnar grains and heterogeneously distributed phases commonly form in metallic
alloys produced by three-dimensional (3D) printing and are often considered undesirable …

Laser powder bed fusion (LPBF) is a proven additive manufacturing (AM) technology for
producing metallic components with complex shapes using layer-by-layer manufacture …

Metal-based additive manufacturing (AM) permits layer-by-layer fabrication of near net-
shaped metallic components with complex geometries not achievable using the design …

In the current study, cylindrical samples of AlSi10Mg alloy were fabricated using direct metal
laser sintering (DMLS) technique in vertical and horizontal directions. The microstructure of …

Solidification during fusion-based additive manufacturing (AM) is characterized by high
solidification velocities and large thermal gradients, two factors that control the solidification …

In the current review, an exceptional view on the multi-scale integrated computational
modelling and data-driven methods in the Additive manufacturing (AM) of metallic materials …