This study aims to investigate the fabrication feasibility of a conventionally rolled low-carbon
low-alloy shipbuilding steel plate (EH36) by emerging wire arc additive manufacturing …

Using the shear-compression specimen (SCS), thermo-viscoplastic behavior of DP800 steel
has been investigated systematically over a wide range of strain rates, including quasi-static …

Bent parts of complex shapes with high precision are increasingly required. To achieve a
high precision of parts, especially the required bending angle, a suitable design of process …

Springback is one of the most common problems in the sheet metal forming operation. In the
literature there have been numerous studies about springback and its compensation for …

In order to identify experimental limit strains at fracture for metallic sheets under in-plane
biaxial loadings, a specific specimen shape has to be defined. Ideally, the proposed …

Grade A (GA) and high strength steel DH36 ship steels possessing different chemical
compositions were used, and strength properties of GA steel and DH36 steel were …

Mechanical testing of dual phase (DP) steels at low strain rates (10− 3 s− 1) have shown that
they are susceptible to dynamic strain aging (DSA) between 100° C–400° C. During …

The aim of this study was to evaluate the fracture toughness of resistance spot welded
(RSW) lap joints of galvanized DP600 steels. RSW lap joints galvanized DP600 steel sheets …

Zinc coated dual phase 600 steel (DP 600 grade) was investigated, utilisation of which has
gradually increased with each passing day in the automotive industry. The adhesive …

In order to investigate the friction and wear behavior of high strength steel in hot stamping
process, a hot strip drawing tribo-simulator is developed and the friction coefficient, which is …