[HTML][HTML] Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
There are several facets of aluminum when it comes to sustainability. While it helps to save
fuel due to its low density, producing it from ores is very energy-intensive. Recycling it shifts …
fuel due to its low density, producing it from ores is very energy-intensive. Recycling it shifts …
Precipitation kinetics in metallic alloys: Experiments and modeling
A Deschamps, CR Hutchinson - Acta Materialia, 2021 - Elsevier
Nanoscale precipitation is one of the most widely used microstructural tools to manipulate
the properties of metallic alloys, and especially to reach high strength. Optimal …
the properties of metallic alloys, and especially to reach high strength. Optimal …
Highly stable coherent nanoprecipitates via diffusion-dominated solute uptake and interstitial ordering
H Xue, C Yang, F De Geuser, P Zhang, J Zhang… - Nature materials, 2023 - nature.com
Lightweight design strategies and advanced energy applications call for high-strength Al
alloys that can serve in the 300‒400° C temperature range. However, the present …
alloys that can serve in the 300‒400° C temperature range. However, the present …
Retarding Ostwald ripening through Gibbs adsorption and interfacial complexions leads to high-performance SnTe thermoelectrics
D An, J Wang, J Zhang, X Zhai, Z Kang… - Energy & …, 2021 - pubs.rsc.org
Nanoprecipitation is a routine method to decrease the thermal conductivity for advancing
thermoelectric performance. However, the coarsening/Ostwald ripening of precipitates under …
thermoelectric performance. However, the coarsening/Ostwald ripening of precipitates under …
High-entropy alloys with high saturation magnetization, electrical resistivity and malleability
Soft magnetic materials (SMMs) find important applications in a number of areas. The
diverse requirements for these applications are often demanding and challenging for the …
diverse requirements for these applications are often demanding and challenging for the …
Precipitation kinetics, microstructure evolution and mechanical behavior of a developed Al–Mn–Sc alloy fabricated by selective laser melting
The dynamic metallurgical characteristics of the selective laser melting (SLM) process offer
fabricated materials with non-equilibrium microstructures compared to their cast and …
fabricated materials with non-equilibrium microstructures compared to their cast and …
Scandium in aluminium alloys
J Röyset, N Ryum - International Materials Reviews, 2005 - Taylor & Francis
A considerable part of the available literature on scandium in aluminium alloys is reviewed.
Experimental data and assessments of the binary Al–Sc phase diagram, a wide range of …
Experimental data and assessments of the binary Al–Sc phase diagram, a wide range of …
Precipitation evolution in Al–0.1 Sc, Al–0.1 Zr and Al–0.1 Sc–0.1 Zr (at.%) alloys during isochronal aging
Precipitation strengthening is investigated in binary Al–0.1 Sc, Al–0.1 Zr and ternary Al–0.1
Sc–0.1 Zr (at.%) alloys aged isochronally between 200 and 600° C. Precipitation of Al3Sc …
Sc–0.1 Zr (at.%) alloys aged isochronally between 200 and 600° C. Precipitation of Al3Sc …
Coarsening resistance at 400 C of precipitation-strengthened Al–Zr–Sc–Er alloys
C Booth-Morrison, DC Dunand, DN Seidman - Acta Materialia, 2011 - Elsevier
The effect of substituting 0.01 or 0.02 at.% Er for Sc in an Al–0.06 Zr–0.06 Scat.% alloy was
studied to develop cost-effective high-temperature aluminum alloys for aerospace and …
studied to develop cost-effective high-temperature aluminum alloys for aerospace and …
Elevated temperature microstructural stability in cast AlCuMnZr alloys through solute segregation
Commonly used commercial cast aluminum alloys for the automotive industry are viable for
temperatures only up to 250° C, despite decades of study and development. Affordable cast …
temperatures only up to 250° C, despite decades of study and development. Affordable cast …