Zr–Nb alloy is successfully used as structural materials in nuclear reactors. However, its
widespread application is restricted by corrosion due to complex in-pile environments. This …

The main objective of this work is to compare conventional Portland cement pastes (OPC)
and alkali-activated geopolymer pastes in terms of compressive strength, phase …

In this study, a new non-equiatomic and cost-effective high-entropy alloy (HEA), Al 8 Cr 12
Mn 25 Fe 35 Ni 20, was designed using thermodynamic parameters and prepared by arc …

The in-situ TiC and TiB reinforced titanium matrix composites were fabricated by laser
powder fusion (LPBF) of B 4 C/Ti powder mixture, and the influence of scan strategy on the …

A series of TiAlCrMn high entropy alloys (HEAs) with variable atomic ratios of Al, Cr, and Mn
were prepared using vacuum melting. High-temperature oxidation behaviors and …

Medium-entropy alloys (MEAs) typically exhibit outstanding mechanical properties, but their
high Young's modulus results in restricted clinical applications. Mismatched Young's …

The influence of multistage heat treatments on the microstructure and mechanical properties
of Ti-6Al-7Nb alloy used for functional structures was systematically studied. Cast Ti-6Al-7Nb …

Abstract A series of (50Zr–50Ti)-xNi alloys were prepared by employing the vacuum arc
melting method within a furnace. The phase composition and microstructure of the (50Zr …

This study focuses on the preparation of zirconium (Zr)-silver (Ag) alloys through the alloying
of pure Zr with a specific content of Ag using an electric arc furnace. Subsequently, the …

Ti–Mo alloys have received increased attention and concern in several applications,
especially in biomedical, because of their appropriate properties, non-toxicity, and …