In this paper, effects of thermal mechanical parameters on the flow behaviors and
microstructure evolution of Mg-7.5 Gd-1.5 Y-0.4 Zr-0.5 Ag (wt%) alloy were analyzed by the …

The microstructure characterization, mechanical properties and texture evolution of a ZK60
alloy achieved via the extrusion-shearing (ES) process were systematically studied with the …

Abstract In this study, Mg/Al bimetallic composite tubes were prepared by direct extrusion-
shear deformation (DESD) process. First, the influence of the shear deformation process on …

The ductility enhancement mechanisms were investigated in AZ31 magnesium alloy based
on the newly proposed concept of shear strain-assisted twin orientation regulation (SATOR) …

In this work, a novel texture control strategy, shear strain-induced twin orientation regulation
(SITOR), was employed to fabricate the Mg–3Al–1Zn (AZ31) alloy with significantly improved …

In this work, the deformation mechanisms of the as-extruded Mg–3Bi–1Ca (BX31, wt.%)
alloy with strength-ductility synergy during room-temperature tension were studied in detail …

In this paper, the role of trace Ag in the dynamic recrystallization (DRX) behaviors and
mechanical properties of Mg-7.5 Gd-1.5 Y-0.4 Zr (wt.%) alloy are illustrated, aided by hot …

The laminate heterogeneous GW103K (Mg-10Gd-3Y)/AZ31 (Mg-3Al-1Zn) alloys were
obtained by diffusion bonding and hot rolling. The influence of the interfacial layer numbers …

Obtaining high strength without sacrificing ductility in Mg alloys is of great importance.
However, the hexagonal close-packed crystal structure critically limits the deformation of Mg …

In this work, extruded plates made of Mg-13.9 Gd-0.45 Zr (wt.%) alloy, without any significant
texture, were rolled at 475° C along the extrusion direction (ED) and the extrusion transverse …