In order to compare the workability of AZ110 alloy with and without addition of La-rich Mish
Metal (MM), hot compression tests were performed on a Gleeble-3500D thermo-mechanical …

A previous paper (Mishra et al., 2008 [1]) showed that the ductility of extruded Mg–0.2% Ce
alloy is higher than that of magnesium and other conventional magnesium alloys. However …

To develop new magnesium alloy sheets with high formability at room temperature, the
microstructure, texture, ductility and anisotropy of rolled Mg–1% Zn–1% Gd and Mg–2% Zn …

We present results from in situ transmission electron microscopy uniaxial nanocompression
experiments of Mg and Mg–0.2 wt.% Ce pillars. We show examples of two common …

Single crystals of pure Mg and Mg-0.8 wt% Gd alloy oriented for non-basal slip were
deformed in plane strain compression at room and elevated temperatures to investigate …

The relationship between the Zn concentration and stretch formability of the rolled Mg–xwt.%
Zn–0.2 wt.% Ce (Mg–xZn–0.2 Ce here after) alloys was investigated. Zn addition of a dilute …

Diffusion in dilute Mg–X alloys, where X denotes Al, Zn, Sn and Ca impurities, was
investigated with first-principles density functional theory in the local density approximation …

The microstructure evolution of pure Mg and two Mg–rare-earth alloys (Mg–3 wt.% Dy and
Mg–3 wt.% Er) was studied during in situ compression tests by electron backscatter …

The addition of manganese in magnesium has the positive effects on improving the
corrosion resistance, creep behavior and damping capacity, and refining the microstructure …

The microstructure, texture and mechanical properties of Mg-6wt% Zn-0.5 wt% Zr (ZK60)
alloys with different La contents (0, 0.5 and 1 wt%) were investigated. The alloys were …