Silicon (Si), which exists in the form of solid solution and silicide, is an important component
in high temperature titanium (Ti) alloys. The content of Si is often limited to less than 0.5 …

Refractory high-entropy alloys (RHEAs) are promising candidates for those applications
requiring of strong materials at high temperatures with elevated thermal stability and …

High-plasticity in-situ TiB/Ti matrix composites (TMCs) are fabricated by in-situ reaction
between Ti and ZrB 2 powder during vacuum sintering followed by hot rolling. Uniform …

Titanium matrix composites (TMCs) have attracted widespread research interest due to their
excellent properties. Herein, TMC reinforced with quasi-continuous reticular nano-TiB …

Centimeter-grade coarse grains commonly exist in heavy ingots of Ti 2 AlNb-based alloy
and severely deteriorate their workability. To investigate the refinement of coarse grains …

A novel two-step hot isostatic pressing strategy has been brought up to fabricate a kind of
TiB/(TA15-Si) composites. The densification process and the process of introducing TiB …

TiC is widely used as an ideal reinforcement to strengthen titanium matrix composites
(TMCs). The morphology, size and distribution of TiC and the interfacial structure of TiC-Ti …

Abstract A (TiB+ TiC+ Y 2 O 3)/α-Ti composite was prepared by induction skull melting to
investigate the microstructure evolution, high temperature tensile properties and the creep …

The microstructural evolution and mechanical properties of low-cost Ti-5.5 Al-1Fe-3.5 Cr-3.2
Zr-0.2 Si alloy during power spinning and after three types of heat-treatment routines (low …

Titanium matrix composites (TMCs) reinforced with titanium boride whisker (TiBw) prepared
by conventional smelting or powder metallurgy via in-situ techniques are inevitable to cause …