[HTML][HTML] Study on fast gas forming with in-die quenching for titanium alloys and the strengthening mechanisms of the components
K Dang, K Wang, W Chen, G Liu - Journal of Materials Research and …, 2022 - Elsevier
The rapid development of the aerospace industry has led to a dramatic increase in the
demand for complex thin-walled structural parts made of titanium alloys. However, the huge …
demand for complex thin-walled structural parts made of titanium alloys. However, the huge …
Microstructural and phase evolution of Ti6Al4V in electron beam wire additive manufacturing and on the subtransus quenching and normalization
A Zykova, A Panfilov, A Vorontsov, V Shmakov… - Materials Science and …, 2024 - Elsevier
Structural evolution of electron beam wire additively manufactured Ti–6Al–4V subjected to
quenching and normalization from the subtransus temperatures 900° C has been studied …
quenching and normalization from the subtransus temperatures 900° C has been studied …
[HTML][HTML] Microstructure/texture evolution maps to optimize hot deformation process of near-α titanium alloy
Z Zhang, J Fan, B Tang, H Kou, J Wang, Z Chen… - Progress in Natural …, 2020 - Elsevier
The microstructure/texture evolution (MTE, for short) map and processing map of a new near
α titanium alloy Ti65 were constructed in order to investigate the workability and …
α titanium alloy Ti65 were constructed in order to investigate the workability and …
[HTML][HTML] On the warm temperature strain accommodation mechanisms of Ti–6Al–4V alloy holding different starting microstructures
M Paghandeh, A Zarei-Hanzaki, HR Abedi… - Journal of Materials …, 2021 - Elsevier
The strain accommodation mechanism of Ti–6Al–4V alloy with different initial microstructure;
equiaxed α+ β, lamellar α+ β, dual phase α+ ά, and fully ά martensite was studied in warm …
equiaxed α+ β, lamellar α+ β, dual phase α+ ά, and fully ά martensite was studied in warm …
Mechanism of impact toughness enhancement obtained by globularization of αGB phase for selective laser melted Ti–6Al–4V alloy
Y Xiao, W Mann, C Liu, L Guo, B He, Y Rong - Materials Science and …, 2024 - Elsevier
The low impact toughness of selective laser melted (SLM) Ti–6Al–4V (Ti64) is a main factor
limiting its widespread application in engineering. In this work, we've greatly improved its …
limiting its widespread application in engineering. In this work, we've greatly improved its …
A unique three-stage dependence of yielding behavior and strain-hardening ability in Ti-10V-2Fe-3Al alloy on phase fraction
Y Chong, S Gao, N Tsuji - Materials Science and Engineering: A, 2021 - Elsevier
Abstract Ti-10V-2Fe-3Al alloy represents one of the most widely adopted metastable β
titanium alloys, the mechanical properties of which were influenced by several factors …
titanium alloys, the mechanical properties of which were influenced by several factors …
Achieving excellent strength-ductility synergy of Ti6Al4V alloy produced by powder metallurgy and thermo-mechanical treatment
K Feng, H Zhang, X Cheng, Q Fan, X Mu, N Xiong - Vacuum, 2023 - Elsevier
This study aimed to enhance the mechanical properties of Ti6Al4V alloy through powder
metallurgy and thermo-mechanical treatment (TMT). By engineering a fine primary α phase …
metallurgy and thermo-mechanical treatment (TMT). By engineering a fine primary α phase …
Effect of lamellar α on the stress corrosion cracking of Ti-6Al-4 V alloy in simulated oilfield brine
G Chi, B Jiang, D Yi, L Yang, S Pan, H Liu… - Materials …, 2021 - Elsevier
The stress corrosion cracking (SCC) behavior of Ti-6Al-4 V alloy with different lamellar α
microstructures in simulated oilfield brine was investigated in this study. The SCC …
microstructures in simulated oilfield brine was investigated in this study. The SCC …
[HTML][HTML] Fine martensite and beta-grain variational effects on mechanical properties of Ti–6Al–4V while laser parameters change in laser powder bed fusion
S Pal, T Bončina, G Lojen, T Brajlih, EŠ Fabjan… - Materials Science and …, 2024 - Elsevier
In this study, several variations of Ti–6Al–4V β-grains and α′-martensites were observed
while changing the combinations of laser parameters and keeping the energy density (ED) …
while changing the combinations of laser parameters and keeping the energy density (ED) …
Microstructure Optimization of Cold Sprayed Ti-6Al-4V using Post-Process Heat Treatment for Improved Mechanical Properties
S Lett, J Cormier, A Quet, P Villechaise, E Meillot… - Additive …, 2024 - Elsevier
Cold spray is a solid state additive process involving layer-by-layer deposition onto a
substrate at supersonic speed. In contrast with conventional additive manufacturing routes …
substrate at supersonic speed. In contrast with conventional additive manufacturing routes …