The discovery of an innovative category of inorganic geopolymer composites has generated
extensive scientific attention and the kaleidoscopic development of their applications. The …

Abstract Ye'elimite (Ca 4 Al 6 O 12 SO 4 or C 4 A 3 S¯) is the main hydraulic mineral present
in calcium sulfoaluminate cement (CSA). The hydration of ye'elimite is responsible for the …

This paper studies the effect of clinkering temperature and duration on the production, phase
evolution and microstructure of low energy Belite Calcium-Sulpho-Aluminate (BCSA) …

The hydration of calcium sulfoaluminate (CSA) clinker at 5, 20 and 40° C was characterized
by a combination of XRD, DTA-TG and ESEM analysis (also with backscattered electron …

This study investigates factors influencing the hydration of ye'elimite, comparing
stoichiometric ye'elimite-rich clinkers with and without free lime (YC and Y, respectively) …

The hydration and strength evolution of two multi-phase ternesite-based cements with 15
and 29 wt% ternesite are reported. The synthesis and hydration properties of single phase …

Fly ash and phosphogypsum were used as Naturally Occurring Radioactive Materials
(NORM) by-products for the synthesis of belite-sulfoaluminate clinkers. The influence of raw …

Concrete is the most utilized construction material and the second most consumed material
on earth after water. As a consequence, its manufacture and use imparts global durability …

A new method for producing calcium sulfoaluminate (CS¯ A) clinkers is described. Sulfur is
introduced from the gas phase as sulfur dioxide and oxygen and reacts with solids during …

Alternating current impedance spectroscopy (ACIS) was used to assess the effect of different
sand, anhydrite and water contents on the electrochemical response of Portland cement …