This work describes the simulation of the continuous lead adsorption over a fixed bed of
activated tea waste (or biosorbent) through a convective–dispersive model. Model capturing …

Extensive study has been done in the context of single metal adsorption from aqueous
solutions but the present study approaches the simultaneous sorption of metal ions. Aim of …

Increasing industrialization and urbanization potentially enhance the uses of Cr (VI)
compounds in electroplating, corrosion inhibition, tanning, printing, and dyeing, from where …

A low cost composite material was synthesized for neodymium recovery from dilute aqueous
solutions. The in-situ production of the composite containing chitosan and iron (III) hydroxide …

Electroplating generates high volumes of rinse water that is contaminated with heavy metals.
This study presents an approach for direct metal recovery and recycling from simulated rinse …

In this study, we investigated the chromate (Cr (VI)) removal from the simulated wastewater
by β-FeC 2 O 4· 2H 2 O, the maximum Cr (VI) removal capacity of β-FeC 2 O 4· 2H 2 O was …

Based on Cu-BTC metal-organic framework, thiol-functionalized and amino functionalized
materials were prepared by the modified Stöber method. Then, the Cu3 (BTC) 2 and the …

An optimized method is presented to make magnetite (MG) modified cellulose membrane
(Cell-MG) from 3-aminopropyltriethoxysilane and diethylenetriaminepentaacetic acid …

The plywood manufacturing process involves debarking of log, peeling and pressing of
ribbons of wood after glueing with proper resin, trimming, sanding and finishing. Washings …

This research investigates the potential use of pyrite cinder (PC) as an efficient Fenton-like
catalyst for the removal of the reactive azo dye Reactive Red 120 (RR120) from aqueous …