This review paper provides an overview of the micropillar compression technique as applied
to magnesium (Mg) and its alloys. It explores the influence of various factors, such as pillar …

Die forging is a processing method that can produce a size and shape close to the finished
product and improve the mechanical properties of the alloy. In this paper, Mg–8Al-0.5 Zn …

Cross rolling (CR) process was successfully applied to solve the grain refinement of the
equiaxed microstructure. In this work, microstructural evolution, textural discrepancy …

In this study, extension twinning nucleation and growth of extruded ZC61 alloy were
investigated using a quasi-in-situ electron backscatter diffraction method during interrupted …

Improving the plasticity of Mg alloys is an important frontier topic in the field of mechanics
and materials. The influence of introduction of amorphous phase, grain size and …

ABSTRACT The response of [100]-oriented single-crystal face-centered-cubic Al0.
1CoCrFeNi and Al0. 3CoCrFeNi high-entropy alloy (HEA) microcrystals tested from 293 to …

Micro-pillars of solution-treated and aged AZ91 magnesium alloy (Mg-9Al-0.7 Zn-0.2 Mn)
have been used to study the influence of precipitates on plastic deformation mechanisms …

The tensile tests of the extruded ZK60 Mg containing a longitudinal weld seam were carried
out at room and elevated temperatures, and the effects of induced microstructure …

The effect of the introduction of {10 1¯ 2}< 10 1¯ 1> twin boundary (TB) on the mechanical
behavior of dual-phase amorphous/crystalline (A/C) MgAl/Mg alloys is investigated by …

The micropillar compression test is a novel experiment to study the mechanical properties of
materials at small length scales of micro and nano. The results of the micropillar …