Organic precipitations are highly sticky and hard if some asphaltenes are present. This
causes a deposition problem to occur when thermodynamic conditions are suitable for …

Asphaltene precipitation and deposition are considered major problems in primary,
secondary and tertiary phases of oil production. These phenomena can cause partial or …

Ionic liquids (ILs) have remarkable features which make them applicable in numerous
processes as environmentally friendly and promising chemicals. However, high viscosity …

One of the major problems during gas injection in unconventional reservoirs is asphaltene
precipitation and deposition. Asphaltenes can reduce the pore throat in the reservoir and …

The aggregation of petroleum asphaltenes has been studied for decades by numerous
experimental techniques, however, few studies had been performed on the special …

Developing and screening economical, efficient, and environmentally friendly anti-
agglomerants (AAs) to address obstructions caused by hydrate formation and agglomeration …

Deposition of asphaltenes upon precipitation is a main flow assurance concern, which
propelled the development of various experimental and modeling techniques to accurately …

The agglomeration and fragmentation of asphaltenes which dictate particle size distribution
(PSD) play an important role in deposition behavior of asphaltene. However, the physics …

Pigging technology is the most common and cost-effective method for wax deposition
remediation, but the inability to accurately predict the pigging parameters during the field …

The solubility of gases in semicrystalline polymers is a significant property with numerous
applications, such as gas-phase polymerization. Although thermodynamic modeling has …