In this study, the microstructure, thermal conductivity, and mechanical properties of Mg–4La–
x Al–0.5 Mn (x= 0, 0.5, 1, 1.5, 2, and 2.5 wt%) alloys were investigated. As the Al content of …

In this work, the thermophysical properties of a novel high pressure die casting (HPDC) Mg–
RE (Mg–6Y–3Zn–1Al, WZA631 in wt pct) alloy are well investigated at the range of 298–673 …

The microstructure in vacuum-assisted high-pressure die casting (HPDC) Mg-4Al-4RE
(AE44) alloy was studied. Special attention was paid to the characteristics of defect bands …

In this study, the effect of minor Ce addition (0, 0.1, and, 0.3 wt.%) on the microstructure
evolution and mechanical properties of rolled Mg–0.6 Al–0.5 Mn–0.2 Ca (AMX100) alloy …

Secondary phases are key factors affecting cracking behavior during casting, but it is still
unclear how exactly cracks form. The cracking susceptibility of die-cast Mg–Ce–Al series …

A practical bimetallic casting consisting of aluminum matrix and cast iron inserts was
manufactured via high-pressure die casting (HPDC) process. Different surface treatment …

Abstract Effects of 3 wt% RE (rare earth) addition on microstructures and mechanical
properties of a high-pressure die casting Mg–8Zn–6Al (ZA86) alloy before and after aging …

The effect of cooling rate on microstructure evolution of Mg–4La–2.5 Al–0.3 Mn (LA42) Mg
alloy was investigated in this study. The results revealed that high-pressure die casting …

The improvement of mechanical properties and the microstructure evolution through adding
Sc to AZ61magnesium alloy were studied. The results indicated that the Mg 17 Al 12 phase …

High-pressure die casting (HPDC) components exhibit unique sandwich microstructural
features along the thickness direction, thereby displaying solute distribution patterns distinct …