The effect of microstructural parameters on the microstructure, tensile properties from room
temperature to 800° C and creep properties at 650° C has been investigated in a 14% Cr …

The collaborative study is focused on the relationship between microstructure and yield
stress for an ODS Fe-9% Cr-based transformable alloy and an ODS Fe-14% Cr-based …

This paper presents a dislocation-mechanics cyclic viscoplasticity model which incorporates
the key physical micro-mechanisms of strengthening and softening for high temperature …

A modified layer of a certain thickness is produced on the surface of 18CrNiMo7-6 alloy steel
after carburizing and quenching that greatly affects the microstructure and fatigue properties …

This paper reports the short-term creep behaviour at elevated temperatures of a MarBN steel
variant. Creep tests were performed at three different temperatures (625° C, 650° C and …

Low cycle fatigue (LCF) behavior of a tempered martensitic Fe-9% Cr-based oxide
dispersion strengthened (ODS) steel at elevated temperatures is correlated to the …

The stability of microstructure and mechanical properties of 9Cr heat resistant steel under
high temperature and long term service conditions has been a hot issue of great interest. In …

Thermal aging experiments on a 9Cr-ODS steel were carried out at 700° C with a period
from 100 up to 10000 h, and the effects on mechanical properties and microstructural …

As structural materials candidates of advanced fission and future fusion reactors, oxide-
dispersion-strengthened (ODS) alloys, which are often ultrafine-grained (with a grain size …

Creep-fatigue (CF) interaction in a tempered martensitic Fe-9% Cr-based oxide dispersion
strengthened (ODS) steel was studied at 650° C by introducing hold-time of up to 30 min at …