The precipitation phase was tailored by adding different Sn contents to the Mg-12Gd-3Y
alloy to achieve multiphase composite strengthening. Adding different Sn contents has …

Abstract Mg-10Gd-2Y-0.4 Ag-0.4 Zr (wt%) alloy plates are prepared by Unidirectional
Rolling (UR) and Cross-Rolling (CR). The effects of these two methods on the microstructure …

This work investigates the effect of dislocation array induced β'precipitation bands on the
creep behavior in wrought Mg-8.9 Gd-1.8 Y-0.5 Zr-0.2 Ag (wt%) alloy. The alloy with …

In this work, the deformation mechanisms of the as-extruded Mg–3Bi–1Ca (BX31, wt.%)
alloy with strength-ductility synergy during room-temperature tension were studied in detail …

The deformation mechanism, microstructure evolution, and precipitation behavior of a Mg-
8.9 Gd-1.8 Y-0.5 Zr-0.2 Ag (wt.%) alloy multi-directionally forged at three different …

In this paper, the role of trace Ag in the dynamic recrystallization (DRX) behaviors and
mechanical properties of Mg-7.5 Gd-1.5 Y-0.4 Zr (wt.%) alloy are illustrated, aided by hot …

Significantly enhancing the mechanical properties of Mg–Bi base series alloys is of great
significance for their wider application prospects. Here, a new Mg–3Bi–1Ca (BX31, wt.%) …

The difficulty in exerting beneficial effects of fine grains, high number density nano-
precipitates as well as weakened texture simultaneously is currently the bottleneck limiting …

Limited ductility consistently poses a challenge for high-strength Mg-RE (rare earth)
structures prepared by additive manufacturing. Particularly following heat treatment, while …

Nb alloy has become a promising material in aerospace due to high melting point, low
density and excellent processing properties. Nevertheless, the mismatched mechanical …