Review on cyclic plasticity of magnesium alloys: Experiments and constitutive models
G Kang, H Li - International Journal of Minerals, Metallurgy and …, 2021 - Springer
Fatigue analysis has always been a concern in the design and assessment of Mg alloy
structure components subjected to cyclic loading, and research on the cyclic plasticity is …
structure components subjected to cyclic loading, and research on the cyclic plasticity is …
Evolution of dislocation and twin densities in a Mg alloy at quasi-static and high strain rates
M Wang, XY Xu, HY Wang, LH He, MX Huang - Acta Materialia, 2020 - Elsevier
The present work, for the first time, quantitatively studies the evolution of both dislocations
and deformation twins with various strain rates in an ATZ311 Mg alloy. Interrupted tensile …
and deformation twins with various strain rates in an ATZ311 Mg alloy. Interrupted tensile …
[HTML][HTML] Micromechanical response of pure magnesium at different strain rate and temperature conditions: twin to slip and slip to twin transitions
The strain rate (ε˙) and temperature (T) dependent mechanical response of single crystal
magnesium (Mg) micropillars compressed along the [2¯ 110] direction (a-axis) is …
magnesium (Mg) micropillars compressed along the [2¯ 110] direction (a-axis) is …
Deformation mechanisms of Mg-Ca-Zn alloys studied by means of micropillar compression tests
The effect of Ca and Zn in solid solution on the critical resolved shear stress (CRSS) of basal
slip, tensile twinning and pyramidal slip in Mg alloys has been measured through …
slip, tensile twinning and pyramidal slip in Mg alloys has been measured through …
Twinning-induced plasticity with multiple twinning modes and disclinations in Mg alloys
Twinning-induced plasticity plays a critical role in determining the deformation behaviors of
hexagonal close-packed metals (eg, Mg and Ti), due to the lack of five independent slip …
hexagonal close-packed metals (eg, Mg and Ti), due to the lack of five independent slip …
[HTML][HTML] Visualization and validation of twin nucleation and early-stage growth in magnesium
The abrupt occurrence of twinning when Mg is deformed leads to a highly anisotropic
response, making it too unreliable for structural use and too unpredictable for observation …
response, making it too unreliable for structural use and too unpredictable for observation …
Towards Mg based light materials of future: properties, applications, problems, and their mitigation
The use of lighter materials is one of the efficient means to mitigate the increasing demands
on fuel resources, reduce CO2 emissions. Mg is one of the lightest material available and …
on fuel resources, reduce CO2 emissions. Mg is one of the lightest material available and …
Fracture of an anisotropic rare-earth-containing magnesium alloy (ZEK100) at different stress states and strain rates: Experiments and modeling
Fracture of an anisotropic rare-earth-containing magnesium alloy (ZEK100) sheet is
investigated at different stress states and strain rates. A variety of sample geometries …
investigated at different stress states and strain rates. A variety of sample geometries …
[HTML][HTML] Texture evolution induced by twinning and dynamic recrystallization in dilute Mg-1Sn-1Zn-1Al alloy during hot compression
Texture evolution of an extruded dilute Mg-1Sn-1Zn-1Al alloy was thoroughly investigated
based on the twinning and dynamic recrystallization (DRX) behavior via hot compression at …
based on the twinning and dynamic recrystallization (DRX) behavior via hot compression at …
Effect of Al content on the critical resolved shear stress for twin nucleation and growth in Mg alloys
J Wang, JM Molina-Aldareguía, J LLorca - Acta Materialia, 2020 - Elsevier
The effect of Al atoms in solid solution on the critical resolved shear stress for twin nucleation
and growth was analyzed by means of the combination of diffusion couples with …
and growth was analyzed by means of the combination of diffusion couples with …