Effect of material positioning on Si-rich TIG welded joints of AA6082 and AA8011 by friction stir processing
The TIG-welded specimens were friction stir processed (FSPed) to analyze the impact
material positioning of the base metals AA8011 and AA6082. The tests included the energy …
material positioning of the base metals AA8011 and AA6082. The tests included the energy …
A study on the metallurgical characterisation of the longitudinally sampled friction stir processed TIG welded dissimilar aluminum joints
In this work, one-pass and two-pass friction stir processing (FSP) were applied to the
tungsten inert gas (TIG) weldments of AA6082-T651 and AA8011-H14 to analyse the …
tungsten inert gas (TIG) weldments of AA6082-T651 and AA8011-H14 to analyse the …
Experimental investigation and parametric optimization of the tungsten inert gas welding process parameters of dissimilar metals
Special attention is required when joining two materials with distinct chemical, physical and
thermal properties in order to make the joint bond robust and rigid. The goal of this study …
thermal properties in order to make the joint bond robust and rigid. The goal of this study …
Statistical modelling and optimization of TIG welding process parameters using Taguchi's method
S Omprakasam, K Marimuthu, R Raghu… - … vestnik-Journal of …, 2022 - ojs30.sv-jme.eu
This current research focuses on optimizing the welding process parameters and
penetration of 5052 alloys using a TIG welding process based on the Taguchi methods …
penetration of 5052 alloys using a TIG welding process based on the Taguchi methods …
Status and progress on fabricating automotive-based aluminium metal matrix composites using FSP technique
Particle reinforcement has been considered as the new technological advancement in terms
of fabricating metal matrix composites (MMCs). There are different kinds of techniques that …
of fabricating metal matrix composites (MMCs). There are different kinds of techniques that …
Microstructure and mechanical properties of tungsten inert gas welded dissimilar aluminum alloys joint subjected to normal multi-pass friction stir process
This work investigated the effect of multi-pass friction stir processing on the tungsten inert
gas welded joints of AA6082/AA8011. The friction stir processing approach is broadly used …
gas welded joints of AA6082/AA8011. The friction stir processing approach is broadly used …
[HTML][HTML] Improved Mechanical Behavior of Friction Stir Drilled 6082 Aluminum Alloy via T6 Treatment
Abstract 6082 Al-alloy underwent a friction stir drilling (FSD) processing. Subsequently, a
two-stage post-heat treatment (PHT) procedure, ie, solution treatment at 550° C for 2 hours …
two-stage post-heat treatment (PHT) procedure, ie, solution treatment at 550° C for 2 hours …
Experimental and numerical study to minimize the residual stresses in welding of 6082-T6 aluminum alloy
One of the most important negative consequence in the fusion welding processes is the
generation of tensile residual stresses in welded joints. The main goals of this work are to …
generation of tensile residual stresses in welded joints. The main goals of this work are to …
[HTML][HTML] 铝合金加筋板焊接温度场和残余应力数值模拟
李陈峰， 金腾龙， 刘德怀， 张一凡， 刘涛 - 舰船科学技术, 2021 - html.rhhz.net
为了掌握铝合金加筋板角接焊过程的温度响应和结构响应, 基于顺序耦合法开展了5083
铝合金加筋板角接焊的数值模拟, 其中采用了双椭球热源模拟MIG 焊的热输入 …
铝合金加筋板角接焊的数值模拟, 其中采用了双椭球热源模拟MIG 焊的热输入 …
Correlation between Microstructure and Bending of FSW and TIG Welded Mg-Rich Aluminium Alloy Joints
This paper reports on the mechanical properties in relation to the microstructure of the Mg-
rich aluminium alloy joints fabricated through friction stir welding (FSW) and tungsten inert …
rich aluminium alloy joints fabricated through friction stir welding (FSW) and tungsten inert …