Effect of Mn addition on melt purification and Fe tolerance in Mg alloys
Two methods for impeding the detrimental impact of iron (Fe) impurity in magnesium (Mg)
alloys on the corrosion properties are studied: the addition of manganese (Mn) and the …
alloys on the corrosion properties are studied: the addition of manganese (Mn) and the …
[HTML][HTML] Predicting and controlling interfacial microstructure of magnesium/aluminum bimetallic structures for improved interfacial bonding
In this study, an overcasting process followed by a low-temperature (200° C) annealing
schedule has been developed to bond magnesium to aluminum alloys. ProCAST software …
schedule has been developed to bond magnesium to aluminum alloys. ProCAST software …
Diffusion behaviour and mechanical properties of binary Mg–Gd system
Abstract Diffusion behaviour of Mg–Gd intermetallic compounds (IMCs) were studied in the
temperature range of 713–793 K using the diffusion couple method. Measured growth …
temperature range of 713–793 K using the diffusion couple method. Measured growth …
[HTML][HTML] Characterization on the formation of porosity and tensile properties prediction in die casting Mg alloys
Z Li, D Li, W Zhou, B Hu, X Zhao, J Wang, M Qin… - Journal of Magnesium …, 2022 - Elsevier
The 3D visualization of the porosity in high-pressure die casting (HPDC) Mg alloys AZ91D
and Mg4Ce2Al0. 5Mn (EA42) was investigated by X-ray computed tomography. It was …
and Mg4Ce2Al0. 5Mn (EA42) was investigated by X-ray computed tomography. It was …
A new magnesium sheet alloy with high tensile properties and room-temperature formability
Lightweight sheet alloys with superior mechanical performance such as high strength,
ductility and formability at room temperature (RT) are desirable for high volume automotive …
ductility and formability at room temperature (RT) are desirable for high volume automotive …
CALPHAD-assisted composition and processing design of high-strength and high-conductivity copper alloy
Q Yang, Z Wang, X Xiao, J Xie - Materials Science and Engineering: A, 2023 - Elsevier
In this work, a Cu–Cr–Ag–Mg–Sn alloy was developed assisted by a CALPHAD technique,
by which a suitable chemical composition (Cu-0.5 Cr-0.1 Ag-0.05 Mg-0.05 Sn) and …
by which a suitable chemical composition (Cu-0.5 Cr-0.1 Ag-0.05 Mg-0.05 Sn) and …
Recent advances in light metals and manufacturing for automotive applications
AA Luo - CIM Journal, 2021 - Taylor & Francis
Advanced light metals, including aluminum, magnesium, and titanium alloys, are
increasingly being used in the automotive industry for weight reduction and structural …
increasingly being used in the automotive industry for weight reduction and structural …
Investigation on the corrosion resistance of the Mg-10Al-xMn alloys based on thermodynamic calculations
X Li, S Liu, Y Du - Corrosion Science, 2021 - Elsevier
To investigate the effect of second phase on corrosion resistance of the Mg alloys, five as-
cast Mg-10Al-xMn alloys were designed based on thermodynamic calculations. The …
cast Mg-10Al-xMn alloys were designed based on thermodynamic calculations. The …
The CALPHAD approach for HEAs: Challenges and opportunities
Phases are key microstructural features that determine material properties. The most
intuitive way of representing phase stability in a material is by its phase diagram. The …
intuitive way of representing phase stability in a material is by its phase diagram. The …
[HTML][HTML] Nonisothermal dissolution kinetics on Mg17Al12 intermetallic in Mg-Al alloys
R Shi - Journal of Magnesium and Alloys, 2022 - Elsevier
In this work, nonisothermal dissolution of intermetallic Mg 17 Al 12 in Mg-Al alloy has been
firstly studied via Differential Scanning Calorimetry-DSC, X-Ray Diffraction-XRD and …
firstly studied via Differential Scanning Calorimetry-DSC, X-Ray Diffraction-XRD and …