The microstructure-induced high-temperature oxidation behavior of Cu-10Ni-3Al (wt%) at
800℃ was studied through experimental methods and CALPHAD modeling. In this study, a …

An adequate thermodynamic model is required for describing the long-period stacking
ordered (LPSO) phase because previously developed models cannot account for the …

The phase composition, character of nonequilibrium solidification, structure, and
strengthening of alloys based on the Al–8% Zn–3% Mg (wt%) composition, which are …

In this work, the influence of different Ti additions on microstructure and property in Cu-Cr
alloys has been studied and the primary relationship of processing-microstructure-property …

Microstructure and corrosion behavior of the Mg-3Al-x Mn (x= 0, 0.12, 0.21, 0.36,
0.45)(hereafter in wt.%) alloys were experimentally investigated by electron probe …

Control of the homogenization process is important in obtaining high extrudability and
desirable properties in 6xxx aluminum alloys. Three consecutive steps of the process chain …

Recently, the design of lightweight high entropy alloys (HEAs) with a mass density lower
than 5 g/cm3 has attracted much research interest in structural materials. We applied a first …

The shift towards vehicle electrification must progress while simultaneously addressing
sustainability challenges related to lightweighting, which is the intensifying need for high …

We developed a coupled CALPHAD and finite element-based computational model of the
Laser Powder Bed Fusion (LPBF) process for HAYNES230, considering the feedstock …

The homogenous dispersion of particles in a metal matrix is of critical importance to the
design and manufacturing of particle-reinforced metal matrix composites (MMCs). This work …