The evolutions in lamellar and fibrillar structures of poly (ethylene terephthalate)(PET)
industrial fiber during taut-ends thermal annealing were investigated mainly using …

Synchrotron radiation wide angle X‐ray diffraction (WAXD) and small angle X‐ray scattering
(SAXS) were performed to study the structures of four typical types of poly (ethylene …

Bicomponent fibers using the high‐performance polymer poly (phenylene sulfide)(PPS)
together with poly (ethylene terephthalate)(PET) were melt‐spun. Both possibilities of using …

Three POY yarns of 80/100, 80/48, and 80/34 denier/filament are textured with four variables
at five levels. The Box-Hunter statistical experimental design is used to produce thirty-six …

A series of branched poly (ethylene terephthalate) samples was prepared by employing
0.07–0.42 mol% trimethylolpropane (TMP) for melt polycondensation. These polymers were …

High‐speed spinning of high molecular weight poly (ethylene terephthalate)(PET) having an
intrinsic viscosity of 0.98 dL/g was performed at the take‐up velocity range of 2.5–5.5 …

The structural and thermal behaviors of polyester yarns treated with trichloroacetic acid–
chloroform (TCAC) mixture were investigated by differential scanning calorimetric analysis …

The objective of this research is to understand the structure, melt behavior, and fiber
properties of Amlon® D, one part of a family of thermoplastic high acrylonitrile (PAN) …

Textile fibers were obtained from secondary polyethylene terephtalate (PET) and its mixtures
with primary PET at initial orientation of 18000–33000%, rate of additional orientation …

From the rheological theory, the combination of the rheological characteristic of melt
spinning and principle of spinning, the paper researches the mathematical model of the …