Shape memory alloys (SMAs) are types of materials that can restore their original shape
upon severe or quasi-plastic deformation, being exposed to specific external stimuli …

Environmental and human-friendly welding is the need of the hour. In this context, this study
explores the application of the regulated metal deposition (RMD) technique for ASTM A387 …

This study focused on electron microscopy studies of microstructural defects formed in an
additively manufactured (AM) AlSi10Mg alloy as a result of post-deformation by equal …

Medium temperature compressions were implemented in the range of 433–593 K and 0.001–
5 s− 1 to reveal the workability and dynamic restoration mechanisms of quenched Al-6.2 Zn …

Bobbin tool friction stir welding has high process flexibility and is particularly suitable for
closed structures such as hollow extrusions or pipes. More recently, a bobbin tool concept …

Tailoring the size and morphology of Al 6 (Mn, Fe) phase particles is expected to achieve a
good combination of strength and ductility in Al–Mg–Mn–Fe alloys. In this study, the …

Rings made of 2219 Al alloy are typically manufactured by multi-directional forging (MDF)
and ring rolling at 460° C, followed by heat treatment. However, this process often results in …

Previous studies have yet to show a consistent effect of severe plastic deformation (SPD)
processing on the wear behavior of different metals and alloys. To fill this scientific gap, this …

The flow curves of a wrought Al-Cu-Mg-Ag within the temperature range 350–470° C and
strain rate range 0.01–10 s− 1 were acquired through isothermal compression tests. Based …

Casting technology plays a crucial role in the advanced production of vehicle parts due to its
relatively low manufacturing cost and flexibility. However, a major challenge is to improve …