Microstructure and mechanical properties of extruded Mg-6Al-2X (X= Cu/Ni/Fe) alloy used degradable bridge plugs
W Liu, B Liu, S Zhang, Z Lin, Y Zhang, P Wu… - … Composites and Hybrid …, 2023 - Springer
Magnesium alloys have recently received much attention as fracturing tools for
unconventional oil and gas development. It is well known that increasing micro-galvanic …
unconventional oil and gas development. It is well known that increasing micro-galvanic …
A novel strengthening mechanism in crystalline/amorphous dual-phase Mg alloys: a molecular dynamics study
L Han, HY Song, MR An, TZ Shen, YL Li - Journal of Non-Crystalline Solids, 2023 - Elsevier
The crystalline/amorphous dual-phase structure is a novel and advanced strategy to
improve the mechanical properties of Mg alloys. Here, molecular dynamics simulation is …
improve the mechanical properties of Mg alloys. Here, molecular dynamics simulation is …
Microstructure relevant fatigue short crack propagation behavior of Al0. 3CoCrFeNi high entropy alloy: in-situ SEM study
H Zhai, W Zhang, J Jiang, X Ma, H Lin, C Xiao… - International Journal of …, 2023 - Elsevier
The microstructure effects on fatigue short crack propagation behavior of Al 0.3 CoCrFeNi
high entropy alloys (HEAs) were studied by in-situ fatigue testing under scanning electron …
high entropy alloys (HEAs) were studied by in-situ fatigue testing under scanning electron …
Effect of Sn addition on microstructure, hardness and corrosion behavior of CoCrFeNiSnx high entropy alloys in chloride environment
W Chang, X Wang, H Qian, X Chen, Y Lou, M Zhou… - Corrosion …, 2024 - Elsevier
The microstructure, hardness and corrosion behavior of CoCrFeNiSn x (x= 0, 0.1, 0.5 and
1.0) HEAs were investigated in this work. The increase of the Sn addition resulted in the …
1.0) HEAs were investigated in this work. The increase of the Sn addition resulted in the …
[HTML][HTML] A CALPHAD thermodynamic model for multicomponent alloys under pressure and its application in pressurized solidified Al–Si–Mg alloys
High pressure technology has been utilized as an important means to regulate phase
structure and improve the properties/performance of alloys. The CALPHAD approach based …
structure and improve the properties/performance of alloys. The CALPHAD approach based …
Abnormal grain growth: a spontaneous activation of competing grain rotation
Unconventional white‐beam Laue synchrotron X‐ray diffraction is used on fine‐grained, as‐
rolled magnesium alloy during an in situ heating experiment. At high temperatures …
rolled magnesium alloy during an in situ heating experiment. At high temperatures …
Effect of final rolling deformation on microstructure, work hardening and softening behavior of Mg-8Li-3Al-0.3 Si alloys
Y Li, K Deng, C Wang, K Nie, Q Shi, P Tian… - Journal of Alloys and …, 2024 - Elsevier
Abstract The Al-27Si alloy was prepared using spray deposition and subsequently
incorporated into Mg-Li alloy by vacuum melting furnace to produce a novel Mg-8Li-3Al-0.3 …
incorporated into Mg-Li alloy by vacuum melting furnace to produce a novel Mg-8Li-3Al-0.3 …
[HTML][HTML] Enhancing the mechanical properties of Mg–Al alloy by introducing Al2Y nanoparticles via rapid-cooling solidification and optimized heat treatments
L Zai, X Tong, H Zhang, X Xue - Journal of Materials Research and …, 2024 - Elsevier
Coarse grain and poor thermal stability of Mg 17 Al 12 are usually present in the as-cast Mg–
Al alloys, which are detrimental to the mechanical properties. In this work, the microstructure …
Al alloys, which are detrimental to the mechanical properties. In this work, the microstructure …
Hydrostatic pressure-induced transition in grain boundary segregation tendency in nanocrystalline metals
Impurity segregation at grain boundaries (GBs) can have a profound impact on the
mechanical behavior of nanocrystalline metals. In this study, we employ atomistic …
mechanical behavior of nanocrystalline metals. In this study, we employ atomistic …
Optimization of microstructure and tensile properties for a 13Cr-1W ODS steel prepared by mechanical alloying and spark plasma sintering using pre-alloyed powder
M Zhao, P Zhang, J Xu, W Ye, S Yin, J Zhao… - Materials …, 2024 - Elsevier
An oxide-dispersion-strengthened (ODS) 13Cr-1W steel has been fabricated through
mechanical alloying (MA) and spark plasma sintering (SPS) using pre-alloyed Fe-Cr-WY …
mechanical alloying (MA) and spark plasma sintering (SPS) using pre-alloyed Fe-Cr-WY …