Precipitation-strengthened Cu alloys with high strength and conductivity (HSC) has become
widespread in the electronic and electrical industries. Although pure Cu exhibits high …

Thermal-mechanical treatment is critical for the synthesis of Cu-Ni-Si alloys with high
strength and conductivity. In this work, a high-temperature/short-time pre-aging treatment …

The CuCrSn alloy is promising as a high-strength and high-conductivity Cu alloy due to its
relatively low smelting requirement. However, thus far investigations into the CuCrSn alloy …

The microstructural evolution, precipitation behavior and mechanical properties of Cu–19Ni–
6Cr-xMn (x= 0, 1, 3, 5, 7, 9 wt%) alloys were examined in the presence of solution treatment …

The microstructural evolution of Cu–3Ti–2Ni alloy under primary and secondary cold rolling
combined aging was investigated through various characterization techniques including …

Abstract A Cu-0.4 Cr-0.39 Zn-0.1 Mg-0.07 Zr (wt%) alloy was prepared using cryogenic
rolling process and multistage thermo-mechanical treatment to achieve excellent …

Cryogenic rolling (CR) and room-temperature rolling (RTR) process of AA5154 were studied
for their effects on the strengthening mechanisms underlying the alloy's mechanical …

Three kinds of Cu-Ni-Al alloys, whose chemical compositions are located in the Cu-rich
corner of the isothermal section of the Cu-Ni-Al ternary phase diagram, were prepared by …

Abstract The Cu-Ni-Si/1010 steel bimetallic laminated composites (BLCs) were prepared by
continuous solid/liquid bonding, and the microstructure, mechanical properties and …

The structural evolution and performance variations of Cu-4Ti-1Ni alloy during the aging
process were investigated using Transmission Electron Microscopy (TEM), X-Ray Diffraction …