As the lightest metallic structural materials with excellent damping capacity, good castability,
and high specific strength, Mg alloys have huge potential for application in many industries …

The production of magnesium alloys by the powder metallurgy (P/M) method is difficult and
troublesome. An alternative production method with easy usability is therefore required, and …

Abstract Effects of Zn addition on the microstructure and tensile properties of as-extruded Mg-
8Al-2Sn (AT82) alloy were investigated in the present work. All the extruded AT82 alloys …

Titanium and its alloy are commonly used as surgical staples in the reconstruction of
intestinal tract and stomach, however they cannot be absorbed in human body, which may …

The microstructure and mechanical properties of as-extruded Mg-1.0 Sn, Mg-1.0 Sn-0.5 Zn,
Mg-1.0 Sn-0.7 Ca and Mg-1.0 Sn-0.5 Zn-0.5 Ca (all in wt%) alloy sheets were investigated …

A new type of wrought magnesium alloy Mg-3.0 Zn-1.0 Sn-0.3 Mn-0.3 Ca (ZTMX3100) was
developed in this work. The effects of extrusion temperature (200–400° C) on grain structure …

In this study, the effect of zinc addition on the microstructure and mechanical properties of
magnesium five-tin (Mg5Sn) alloys was investigated. The powder metallurgy (P/M) method …

We report that microalloying with Mn substantially enhances the corrosion resistance of
extruded Mg–8Sn–1Zn–1Al alloy. The corrosion rates, measured by immersion tests in 0.6 …

Mg-6Zn magnesium alloys microalloyed with varying Al content (0, 1, 3, 5 and 7 wt%) were
prepared by permanent mould casting. The effects of Al on the microstructure and …

Microstructure and corrosion properties of extruded Mg–8Sn–1Zn alloys with varying Al
contents were investigated. Microstructures of the extruded alloys mainly consisted of α-Mg …