Resource savings by sustainability assessment and energy modelling methods in mechanical machining process: A critical review
In machining processes, there are contradictions between high efficiency and
environmentally-friendly machining. This indicated that there is a major potential for …
environmentally-friendly machining. This indicated that there is a major potential for …
Influence of MoS2 and graphite-reinforced nanofluid-MQL on surface roughness, tool wear, cutting temperature and microhardness in machining of Inconel 625
The machinability of nickel-based alloys is affected by the amount of friction and heat
produced through machining. The usage of metalworking fluids raises concerns about the …
produced through machining. The usage of metalworking fluids raises concerns about the …
Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication
S Mahapatra, A Das, PC Jena… - Proceedings of the …, 2023 - journals.sagepub.com
This article aims to analyze the tool vibration, surface roughness, and chip morphology in
hard turning of hot work AISI H13 steel under multi-walled carbon nanotubes mixed …
hard turning of hot work AISI H13 steel under multi-walled carbon nanotubes mixed …
Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment
This paper explores the challenges of machining difficult-to-cut metals using tools like
coated carbide, ceramics, and CBN under dry conditions, addressing issues such as heat …
coated carbide, ceramics, and CBN under dry conditions, addressing issues such as heat …
Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning
AISI D6 (hardness 65 HRC) is one of the hard-to-cut steel alloys and commonly used in
mould and die making industries. In general, CBN and PCBN tools are used for machining …
mould and die making industries. In general, CBN and PCBN tools are used for machining …
Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and …
The alloy steels commonly used for manufacturing of moulds and dies are the metals under
hard-to-cut category because of their hardness above 50 HRC in order to attain high …
hard-to-cut category because of their hardness above 50 HRC in order to attain high …
[PDF][PDF] Graph Theory and Matrix Approach for Machinability Enhancement of Cryogenic Treated Cobalt Bonded Tungsten Carbide Inserts.
B Karnan, A Kuppusamy - International Journal of Heat & …, 2021 - researchgate.net
Accepted: 2 July 2021 Cryogenic treatment is a sustainable manufacturing process
preferred to improve the properties of the material. In the present study, the effect of cryo …
preferred to improve the properties of the material. In the present study, the effect of cryo …
[HTML][HTML] Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions
The machining of nickel-based super alloys is challenging, owing to the generation of high
cutting temperatures, as well as difficulty in maintaining dimensional accuracy and …
cutting temperatures, as well as difficulty in maintaining dimensional accuracy and …
Improving the machining performance with bio-degradable coconut oil-assisted MQL turning of AISI-1040 steel: a sustainable machining approach
S Tiwari, M Amarnath - Biomass Conversion and Biorefinery, 2023 - Springer
To counteract the adverse effects of mineral oil-based cutting fluids, manufacturing
industries are aspire toward environment-friendly and less toxic cutting fluids. The …
industries are aspire toward environment-friendly and less toxic cutting fluids. The …
Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning
In the present study, a newly developed AlTiSiN coating material deposited on carbide insert
by scalable pulsed power plasma (SPPP) technique is used for machinability investigation …
by scalable pulsed power plasma (SPPP) technique is used for machinability investigation …