The effects of dynamic and post‐dynamic recrystallization (DRX and post‐DRX) on the
microstructure and mechanical properties of austenitic stainless steels are critically …

Grain size effects on the properties of AISI 304 austenitic stainless steel are studied. Yield
stress (YS) and ultimate tensile strength (UTS) increased with decreasing grain size (Hall …

Butt-joint seam of a high entropy alloy (HEA) of the CoCrFeNiMn system was successfully
obtained by friction stir welding (FSW). The HEA was produced by self-propagating high …

In this study, an age-hardenable 2219 Al–Cu alloy was severely deformed by
multidirectional forging (MDF) at 360–510° C, followed by solution treatment and T8 aging …

A 304L-type austenitic stainless steel was subjected to plate rolling at ambient temperature
and at 573 K to total strains of 3 and then annealed at temperatures of 873, 973 and 1073 K …

Age-hardenable 2A14 aluminum alloy was subjected to multidirectional forging (MDF) at
different temperatures (380, 430, 480° C) and then treated with solid-solution and T6 aging …

The microstructural changes leading to nanocrystalline structure development and the
respective tensile properties were studied in a 304L stainless steel subjected to large strain …

The change in the grain boundary network during recrystallization and grain growth was
studied in a 316L austenitic stainless steel subjected to 5% cold rolling reduction. The …

The effect of recrystallization annealing on the grain boundary assembly of a 316 L-type
austenitic stainless steel produced by selective laser melting was studied. The primary …

Thermomechanical process (TMP) for grain boundary (GB) regulation is conducted on pure
nickel wires to study the coupling effect of torsion and electric pulse treatment (EPT) on GB …