In the past two years, significant progresses have been achieved in high-performance cast
and wrought magnesium and magnesium alloys, magnesium-based composites, advanced …

Recent studies show significant advances in improving the mechanical properties of
magnesium and its alloys. While many papers deal with different alloy compositions, it is …

This work reported the effect of extrusion speeds on the microstructures and mechanical
properties of Mg-Ca binary alloy. The results showed that yield strength of the as-extruded …

The effect of Ga element on microstructure, corrosion behavior and tensile mechanical
properties of as-extruded Mg–5Sn–xGa (x= 0, 1, 2, 3, all in wt%) alloys was investigated …

Reducing the yield asymmetry is very important concern for wrought Mg-Li alloys. In this
study, Mg-5Li-3Al-2 Zn (LAZ532) alloy was successfully produced by hot-extrusion followed …

Biomedical magnesium alloys have become an ideal material for degradable implants
because of their similar density and elastic modulus with human bone. In this study, Mg-3Zn …

We report that the corrosion resistance of hot-rolled Mg–8Sn–1Al–1Zn alloy was significantly
enhanced by Sm microalloying. Corrosion rates, measured after immersion for 72 h in 0.6 M …

Morphology and distribution of intermetallic compounds in the heat-affected zone (HAZ) are
easily altered during welding thermal cycles, contributing to the softening of the HAZ …

In this study, accumulative extrusion bonding (AEB) was used to process Mg–1Gd/Mg–13Gd
laminated composites, in which the Mg–13Gd layers had much finer grains than the Mg …

Abstract A novel Mg-5.34 Al-2.23 Zn-1.73 Sn (wt%, AZT522 for short) alloy with high strength-
ductility synergy was designed and fabricated via simple hot rolling and annealing treatment …