The role of alloying element segregation at grain boundary on the microstructure and
mechanical properties is investigated in the case of Ca, Ce, and Nd addition in Mg-1Zn …

The micro addition of Ca is demonstrated to noticeably increase the strength and ductility of
Mg–Zn–Ce alloy, which is closely correlated with the enhanced alloying segregation at grain …

Texture modification during sheet rolling appears differently in binary Mg-RE (rare-earth) or
Mg-Ca alloy, compared to their ternary counterparts containing Zn. The differences in texture …

Low-alloyed magnesium (Mg) alloys have emerged as one of the most promising
candidates for lightweight materials. However, their further application potential has been …

In this work, the effect of built direction on the small-scale mechanical properties and
microstructure of a novel maraging stainless steel (SS-CX) manufactured through the …

The relationship between Zn content and room temperature (RT) mechanical properties of
dilute Mg-xZn-0.1 Ca (x= 0.1, 0.2, 0.3, 0.5, 1.5, 2.5 in wt%) alloy sheets was investigated …

Abstract Mg-8Gd-0.5 Zr (wt%) alloy and Mg-8Gd-3Sm-0.5 Zr (wt%) alloy were prepared by
casting method in this paper. The microstructures of the two alloys after hot compression at …

Micro-alloying of Ca in Mg–1Zn-0.3 Nd (wt.%) alloy is found to significantly improve tensile
strength and process high ductility simultaneously. It closely correlates with grain refinement …

In this study, we are pleased to report a low-alloyed Mg–1.0 Zn–0.45 Ca–0.35 Sn–0.2 Mn
(wt.%) alloy sheet fabricated by hot rolling, showing superplastic deformation ability with …

The effect of Zn content on grain growth kinetics of the fine-grained extruded Mg–2Gd–xZn
(x= 0, 1, 2, 3 wt%) alloys was investigated by annealing of the as-extruded sheets in the …