Regulating solute partitioning utilized to decorate grain boundary for improving corrosion resistance in a model Al-Cu-Mg alloy
The precise manipulation of grain boundary microstructure, including interfacial solute
partition and precipitate distribution, is crucial for regulating the corrosion resistance of age …
partition and precipitate distribution, is crucial for regulating the corrosion resistance of age …
[HTML][HTML] Corrosion behavior of Al-6.8 Zn-2.2 Mg-Sc-Zr alloy with high resistance to intergranular corrosion
A high-strength and anti-intergranular corrosion (IGC) Al-6.8 Zn-2.2 Mg-Sc-Zr alloy (AS
alloy) was designed, and the effects of Sc addition and Cu removal on the microstructure …
alloy) was designed, and the effects of Sc addition and Cu removal on the microstructure …
Corrosion behaviour and mechanism of new aerospace Al–Zn–Mg alloy friction stir welded joints and the effects of secondary Al3ScxZr1− x nanoparticles
Y Deng, R Ye, G Xu, J Yang, Q Pan, B Peng, X Cao… - Corrosion …, 2015 - Elsevier
Corrosion behaviour, residual stress, intermetallics and microstructure of friction stir welded
aerospace Al–Zn–Mg and Al–Zn–Mg–0.10 Sc–0.10 Zr (wt.%) alloys were investigated …
aerospace Al–Zn–Mg and Al–Zn–Mg–0.10 Sc–0.10 Zr (wt.%) alloys were investigated …
[HTML][HTML] The microstructure and corrosion resistance of as-extruded Mg-6Gd-2Y-(0–1.5) Nd-0.2 Zr alloys
Y Luo, Y Deng, L Guan, L Ye, X Guo - Materials & Design, 2020 - Elsevier
In this study, the microstructure and corrosion resistance of Mg-6Gd-2Y-χNd-0.2 Zr (χ= 0, 0.5,
1 and 1.5 wt%) alloys in extrusion condition are investigated using the correlative …
1 and 1.5 wt%) alloys in extrusion condition are investigated using the correlative …
Enhancement of the discharge performance of Al-0.5 Mg-0.1 Sn-0.05 Ga (wt.%) anode for Al-air battery by directional solidification technique and subsequent rolling …
Z Wu, H Zhang, J Zou, X Shen, K Qin, C Ban… - Journal of Alloys and …, 2020 - Elsevier
The corrosion behavior and discharge characteristics of Al-0.5 Mg-0.1 Sn-0.05 Ga (wt.%)
alloys with different grain sizes in 4 M NaOH solution were investigated by collecting …
alloys with different grain sizes in 4 M NaOH solution were investigated by collecting …
Quantitative Interpretation of Potentiodynamic Polarization Curves Obtained at High Scan Rates in Scanning Electrochemical Cell Microscopy
H Zhou, D Chhin, Y Li, D Gallant, A Morel… - Analytical …, 2024 - ACS Publications
Scanning electrochemical cell microscopy is becoming the tool of choice for the
investigation of localized metal corrosion. Typically, potentiodynamic polarization …
investigation of localized metal corrosion. Typically, potentiodynamic polarization …
Development of gradient microstructure in mild steel and grain size dependence of its electrochemical response
This work discusses a novel technique to develop graded microstructure consisting of fine
grains on the surface and coarse grains in the interior. It consisted of preferential surface …
grains on the surface and coarse grains in the interior. It consisted of preferential surface …
Novel Mg-based alloys by selective laser melting for biomedical applications: microstructure evolution, microhardness and in vitro degradation behaviour
T Long, X Zhang, Q Huang, L Liu, Y Liu… - Virtual and Physical …, 2018 - Taylor & Francis
ABSTRACT Laser-melted Mg-3Zn-x Dy (x= 0, 1, 3, 5 wt.%) alloys were investigated as
candidate materials for biodegradable metallic implant applications. The results showed that …
candidate materials for biodegradable metallic implant applications. The results showed that …
Spray-formed commercial aluminum alloy anodes with suppressed self-corrosion for Al-Air batteries
J Ren, T Liu, J Zhang, M Jiang, Q Dong, C Fu - Journal of Power Sources, 2022 - Elsevier
Commercial 7050 Al alloys produced by spray forming technique and subsequent heat
treatment have been investigated as anodes for Al-air batteries with greatly suppressed self …
treatment have been investigated as anodes for Al-air batteries with greatly suppressed self …
An investigation of the microstructural effects on the mechanical and electrochemical properties of a friction stir processed equiatomic CrMnFeCoNi high entropy alloy
The electrochemical properties of a friction stir processed (FSPed) equiatomic CrMnFeCoNi
high-entropy alloy (HEA) was investigated in an aerated 0.5 M Na 2 SO 4 electrolyte solution …
high-entropy alloy (HEA) was investigated in an aerated 0.5 M Na 2 SO 4 electrolyte solution …