Wear and friction are two unavoidable failures in mechanical systems with moving
components. Hence, the invention of new materials to curtail material losses and frictional …

Tribology, which is the study of friction, wear, and lubrication, largely deals with the service
performance of structural materials. For example, newly emerging high-entropy alloys …

In this work, the effect of the dual-phase microstructure (FCC and Laves phases) of Ni 1.5
CrCoFe 0.5 Mo 0.1 Nb x (x= 0.55 hypoeutectic, 0.68 eutectic and 0.8 hypereutectic) high …

Practical engineering applications of high-entropy alloys (HEAs) are limited owing to the
trade-off between their strength and plasticity. To address this limitation, herein, a …

High-entropy alloys (HEAs) coatings of CoCrFeNiW x (x= 0, 0.25, 0.5, 0.75, 1.0) were
fabricated on AISI1045 steel via laser cladding. The microstructure, microhardness and high …

In this paper, the wear and corrosion resistance of FeNiCoCrMo x (x: atomic ratio, x= 0, 0.15,
0.20, 0.25) high entropy alloy coatings (HEACs) which prepared by laser cladding (LC) …

CoCrFeNi, directly added TiC (D-TiC) and in-situ synthesized TiC (I-TiC) reinforced
CoCrFeNi high entropy alloy coatings (HEACs) were prepared on the surface of 316 …

FeMnCrNiCo+ x (TiC) composite high-entropy alloy (HEA) coatings were manufactured by
laser cladding. Then the small punch and wear experiments at room temperature were …

A cost-effective HEA based self-lubricating composite was fabricated using CrFeNiAl 0.3 Ti
0.3 as matrix and Ag as solid lubricant by hot pressing sintering (HPS), with Ag particles …

Wear and slurry erosion are common problems in the operation of underwater components.
Preventive maintenance can extend the service life of underwater components and increase …