The remarkable mechanical, chemical, and physical characteristics exhibited by metallic
glasses (MGs), arising from their disordered atomic arrangement, present substantial …

Laser powder bed fusion (LPBF), as the most commercialized metal additive manufacturing
technique, is tantalizing the metallurgical community owing to its capabilities of directly …

Nickel matrix composites (NMCs) have received much attention as they show excellent high
temperature performances, which could meet the demand for hot-end components in severe …

Laser powder-bed fusion (LPBF) printed AlCoCrFeNi 2.1 eutectic high-entropy alloy (EHEA)
typically exhibits an in-situ composite structure with an out-of-equilibrium character. Its …

Metallic additive manufacturing (AM) offers near net-shape fabrication but often results in
insufficient strength and/or ductility due to voids or cracks, coarse initial crystalline …

Laser powder bed fusion (L-PBF) has garnered significant interest since its inception as it
offers unparalleled advantages to fabricate complex-shaped metallic components. Due to its …

Abstract Tungsten-copper (W-Cu) joints hold immense promise as plasma-facing materials
in fusion reactors. However, the inherent immiscibility of W-Cu poses significant challenges …

In this work, the novel CoCrNi composite with as high fraction as 5 wt% TiC reinforcements
were additively manufactured (AMed) by laser powder bed fusion (LPBF) of blended …

Abstract Tungsten (W)-copper (Cu) joints are the most promising plasma-facing materials
(PFMs) in fusion reactors. Usually, the W-Cu joints used for PFMs are obtained through …