A titanium matrix composite reinforced by TiB, TiC and Y 2 O 3 was prepared by induction
skull melting. The creep behavior of the composite was tested at the temperature range from …

Abstract Ti–5.9 Al–4.0 Sn–3.5 Zr–0.5 Mo–0.3 Nb–1.0 Ta–0.4 Si–0.8 W–0.05 C (Ti65) alloy is
a high-temperature titanium alloy designed for service at 650° C. To further improve the …

The role of forging deformation on α-Ti in TiB/near α-Ti composites is still an unknown area.
In the present work, the evolution of the variant selection and morphology of α-Ti was …

Initial oxidation behaviors of (Ti 5 Si 3+ TiC)/Ti6Al4V composites were investigated using the
simultaneous thermal analyzer in air for 2 h at 700° C, 750° C and 800° C, respectively …

Creep experiments were carried out on pure Ti after annealed (720° C/2 h, AC), Ti-0.4 Si
alloy after annealed (720° C/2 h, AC) and thermal exposed (720° C/2 h, AC+ 600° C/500 h …

Based on the hot compression tests, the effects of deformation temperature and pre-
deformation on the microstructure evolution of a hybrid (TiB+ Y 2 O 3)/near α-Ti matrix …

An in situ water quenching method was used to explore the microstructure evolution and
reaction mechanism of Ti–Si–C agglomerates during reactive thermal spraying. The …

Near-alpha titanium alloys are widely used in aeroengine blades due to their excellent
specific strength and mechanical properties. The mechanical properties of near-α titanium …

A good joint of TiBw/Ti6Al4V composites and Inconel 718 alloys was obtained by Gas
Tungsten Arc Welding (GTAW) heat transmission. The interfacial reaction mechanism of joint …

采用粉末冶金法制备原位自生网状(Ti 5 Si 3+ TiBw)/TC11 复合材料, 对其金相组织, 微观形貌,
力学性能与断口进行研究分析. 结果表明: TiBw, 部分Ti 5 Si 3 分布于基体颗粒周围 …