Effect of the microwave heating on diffusion kinetics and mechanical properties of borides in AISI 316L
S Ipek Ayvaz, I Aydin - Transactions of the Indian Institute of Metals, 2020 - Springer
In this study, the effect of microwave heating on boride formation and diffusion kinetics in
316L stainless steel alloys was investigated. Boriding was carried out in microwave furnace …
316L stainless steel alloys was investigated. Boriding was carried out in microwave furnace …
Nanocrystalline TiN coatings with improved toughness deposited by pulsing the nitrogen flow rate
Nanocrystalline titanium nitride (TiN) coatings were deposited on Si (100) substrates using
reactive pulsed direct current magnetron sputtering where nitrogen flow rate was pulsed …
reactive pulsed direct current magnetron sputtering where nitrogen flow rate was pulsed …
A study on the tribological characteristics of duplex-treated Ti–6Al–4V alloy under oil-lubricated sliding conditions
The tribological characteristics of the polished, dimpled and over-coated dimpled specimens
were investigated. Dimples were produced on a Ti–6Al–4V alloy specimen using a laser …
were investigated. Dimples were produced on a Ti–6Al–4V alloy specimen using a laser …
Effect of Ar: N2 ratio on structure and properties of Ni–TiN nanocomposite thin films processed by reactive RF/DC magnetron sputtering
Thin films of Ni–TiN nanocomposites have been deposited on Si (100) substrate at Ar: N2=
1: 1, 1: 2 or 1: 3 at ambient temperature by reactive co-sputtering of Ti and Ni targets used as …
1: 1, 1: 2 or 1: 3 at ambient temperature by reactive co-sputtering of Ti and Ni targets used as …
Structure and physical-mechanical properties of nanostructured thin films
DV Shtanskii, SA Kulinich, EA Levashov… - Physics of the Solid …, 2003 - Springer
The structure and mechanical properties of nanostructured thin films based on carbides,
nitrides, and borides of transition metals are described. The mechanisms of localized …
nitrides, and borides of transition metals are described. The mechanisms of localized …
Mechanical and corrosion properties of hydrogen-free DLC coatings prepared on degradable as-extruded WE43 alloy using FCVA technology
L Ren, X Liu, H Cao, Y Tang, F Qi, N Zhao, Y Dai… - Surface and Coatings …, 2024 - Elsevier
Magnesium alloys have great potential for medical applications. However, their rapid
degradation has limited their development. Hydrogen-free DLC coatings were deposited on …
degradation has limited their development. Hydrogen-free DLC coatings were deposited on …
In-situ formation, structural transformation and mechanical properties CrN coatings prepared by MPCVD
Y Xia, Z Xu, J Peng, Q Shen, C Wang - Surface and Coatings Technology, 2022 - Elsevier
This study innovatively employed the microwave plasma chemical vapor deposition
(MPCVD) technique to fabricate Crsingle bondN coatings. The influence of preparation …
(MPCVD) technique to fabricate Crsingle bondN coatings. The influence of preparation …
Magnetron sputtered Cr Ni N and Ti Mo N films: comparison of mechanical properties
F Regent, J Musil - Surface and Coatings Technology, 2001 - Elsevier
This article reports on structure and mechanical properties of Cr Ni N and Ti Mo N
films with a low (< 10 at.%) content of Ni or Mo, respectively. The films were deposited by …
films with a low (< 10 at.%) content of Ni or Mo, respectively. The films were deposited by …
[HTML][HTML] Effects of W content on structural and mechanical properties of TaWN films
LC Chang, CH Tzeng, YI Chen - Coatings, 2022 - mdpi.com
In this study, TaWN films were fabricated through co-sputtering. The effects of W addition on
the structural variation and mechanical properties of these films were investigated. TaWN …
the structural variation and mechanical properties of these films were investigated. TaWN …
Unprecedented Al supersaturation in single-phase rock salt structure VAlN films by Al+ subplantation
Modern applications of refractory ceramic thin films, predominantly as wear-protective
coatings on cutting tools and on components utilized in automotive engines, require a …
coatings on cutting tools and on components utilized in automotive engines, require a …