Additive manufacturing (AM), also known as 3D printing, is a general concept of building a
three-dimensional object layer-by-layer. AM breaks through the manufacturing limitations in …

One of the main advantages of Additive Manufacturing (AM) is the ability to produce
topologically optimized parts with high geometric complexity. In this context, a plethora of …

In this paper, dense oxide dispersion-strengthened (ODS) SS316L with 0.5 wt.% Y2O3 was
fabricated using nano-Y2O3-embedded spherical SS316L powder via laser powder bed …

One of the main challenges in the laser powder bed fusion (LPBF) process is to make dense
and defect-free components. In the LPBF process, there are at least 100 independently …

316L stainless steel is the material of choice for several critical applications in which a
combination of mechanical strength and resistance to corrosion is required, as in the …

It has been documented that the hierarchical character of microstructure produced by laser
powder bed fusion (L-PBF) is the key to superior mechanical properties. Especially …

Optimizing the columnar grains by adjusting the volumetric energy density can improve
mechanical properties of the selective laser melting AISI 316L stainless steel (SLM AISI …

Low-cycle fatigue tests in the elastic-plastic strain region of 09G2S steel specimens
manufactured with a laser 3D printer by selective laser melting method (SLS steel) were …

Fe-Ni based JBK-75 alloy was fabricated by laser melting deposition, then direct aging at
750℃ and 1180℃ high-temperature solution treatment+ aging at 750℃ were selected to be …

The microstructural evolution in response to very-high-cycle fatigue (VHCF) under a stress
ration of-1 in an AlSi10Mg alloy produced by selective laser melting was investigated. The …