Room-temperature (RT) formability is a key factor to broaden the applications of rolled Mg
alloy sheets in the industry. However, rolled Mg alloy sheets generally form strong basal …

Recent studies show significant advances in improving the mechanical properties of
magnesium and its alloys. While many papers deal with different alloy compositions, it is …

In this work, we introduced pure Ti into AZ31 Mg alloy by extrusion process followed by
annealing at 350° C for 1 h to significantly improve the mechanical properties of AZ31 …

Here we report a novel Mg-4.5 Al-1.5 Sn-0.5 Ca (wt%) alloy with high mechanical properties
produced via sub-rapid solidification (SRS) and controlled rolling. In virtue of SRS combined …

In this study, we successfully prepared a Mg-6Zn-0.2 Ca alloy by utilizing sub-rapid
solidification (SRS) combined with hard-plate rolling (HPR), whose elongation-to-failure …

Achieving high strength-ductility synergy is a great challenge in low-alloyed Mg alloys. In
this work, a new Mg–1.0 Zn–0.45 Ca–0.35 Sn–0.2 Mn (wt.%, ZXTM1000) alloy was …

Abstract A novel Mg-5.34 Al-2.23 Zn-1.73 Sn (wt%, AZT522 for short) alloy with high strength-
ductility synergy was designed and fabricated via simple hot rolling and annealing treatment …

Magnesium (Mg) alloys have received increasing interest in the past two decades as
biomaterials due to their excellent biological compatibility. However, the corrosion …

The dependence of abnormal grain growth (AGG) on initial solidification microstructure in
the Al-Mg-Si-Fe alloy was investigated. The AGG was more prone to occur during annealing …

Developing magnesium (Mg) alloys with high strength and ductility at low-cost and high-
efficiency is desirable. Achieving a uniform fine grains structure is an effective strategy to …