During welding, the heat input is a critical parameter in determining the quality of the joints
welded by any welding process. In the case of dissimilar welding, as dissimilar metals have …

Infusion joining, the major influencing parameters are speed and heat input, commonly
determining joining microstructure, defects, and its effect on properties. Here we choose …

A new composite technology is presented consisting of the surface pretreatment of cast
irons, the hot-dipping in a Zn–0.2 wt.% Bi melt and the Al/Fe composite process. The shear …

In this study, the joining of 6061-T6 aluminum alloy and DP590 steel using a M42 steel rivet
via friction riveting technique is investigated. The surface morphology and microstructure …

The versatile aluminium alloys and steel are being used in automotive engines (exhaust
systems), pressure vessels (flanges), turbine rotors, boilers (bonnet) and in many …

In joining of aluminum alloy to hot-dip galvanized (GI) steel by arc welding-brazing process,
evaporation of zinc (Zn) layer and formation of brittle Fe single bond Al intermetallic …

In order to achieve lower CO 2 emissions and lower fuel consumption, modern motor vehicle
industries have been reducing automotive weight with an increasing degree in the past …

Cold metal transfer welding, a low-heat input process, was employed to weld-braze 6061-T6
aluminium alloy to galvanized interstitial free steel using Al–Si-based (4043 and 4047) filler …

Cold wire gas tungsten arc welding (GTAW) process is used to join AA6061-T6 and
galvannealed (GA) steel. The welding current distributed in sine, rectangle, square, and …

In this work, microstructure, mechanical properties and fracture behavior of the
magnesium/steel bimetal using compound casting assisted with hot-dip aluminizing were …