Influence of process parameters on bead geometry and its effect on mechanical properties of CMT welding of automotive grade steel and aluminium alloy using …
This investigation aims to examine the effectiveness of torch position, welding-brazing
parameters on the embedded bead profile and load carrying potential of the brazed joint of …
parameters on the embedded bead profile and load carrying potential of the brazed joint of …
Influence of novel torch type on mechanical and microstructural characteristics of cold metal transfer brazed joints
The present study aimed to braze interstitial free (IF) steel by using novel Braze+ and
conventional Robacta torches with the aid of CuAl8 filler wire for a range of heat input 72 …
conventional Robacta torches with the aid of CuAl8 filler wire for a range of heat input 72 …
Influence of the Duration and Temperature of the Al-Fin Process for the Cast Iron Insert on the Microstructure of the Bimetallic Joint Obtained in the Piston Casting …
The aim of this work was to determine the effect of the duration and temperature of the Al-Fin
process for casting the bimetallic joint on the formation of the metallurgical bond between …
process for casting the bimetallic joint on the formation of the metallurgical bond between …
Mechanical and microstructural characterization of cold metal transfer (CMT) spot aluminium-steel weld-brazed joints
The aim of this work is to optimize the process parameters and to analyze the evolution of
mechanical and microstructural properties during CMT spot weld-brazing of dissimilar …
mechanical and microstructural properties during CMT spot weld-brazing of dissimilar …
Improved interface bonding of Mg/aluminized steel bimetallic castings prepared by solid–liquid compound casting process
S Fan, H Wu - International Journal of Cast Metals Research, 2021 - Taylor & Francis
The effect of pouring temperature on microstructure and bonding properties of the
Mg/aluminised steel bimetallic castings prepared by the solid–liquid compound casting …
Mg/aluminised steel bimetallic castings prepared by the solid–liquid compound casting …
[PDF][PDF] 焊丝成分对铝/钢电弧辅助激光熔钎焊接头组织及力学性能的影响
于晓全， 樊丁， 黄健康 - 材料导报, 2022 - researchgate.net
采用电弧辅助激光熔钎焊方法实现了铝合金与镀锌钢的对接焊, 并在焊接过程中通过填充Al-Mg,
Al-Cu 及Al-Si 焊丝对接头的焊缝及界面进行微观组织调控. 采用扫描电子显微镜(Scanning …
Al-Cu 及Al-Si 焊丝对接头的焊缝及界面进行微观组织调控. 采用扫描电子显微镜(Scanning …
[HTML][HTML] 钢/铝添加粉末激光焊接头界面组织与性能
袁江， 周惦武， 陈胜迁， 孙甲尧， 侯德政 - 材料工程, 2017 - html.rhhz.net
基于密度泛函理论的第一性原理, 利用层技术构建钢/铝激光焊接的Fe/Al 界面模型,
研究金属原子X (X= Sn, Sr, Zr, Ce, La) 置换Fe/Al 界面模型中Fe (Al) 原子的合金形成热及其 …
研究金属原子X (X= Sn, Sr, Zr, Ce, La) 置换Fe/Al 界面模型中Fe (Al) 原子的合金形成热及其 …
Defects Comparison Between Single-and Double-Sided Electron Beam Welded Dissimilar DP600 Steel to 5754 Al Alloy Joints: X-Ray Tomography Study
DP600 steel to Al-5754 alloy dissimilar welding was performed using electron beam welding
process at single and double-sided welding with different welding speed condition. Two …
process at single and double-sided welding with different welding speed condition. Two …
Mechanical Stir Lap Welding of Ferrous and Nickel Coated Steel: The Significance of the Ferrous Coat
The ferrous deuteroporphyrin cast Fe alloy and nickelcoated steel were lap welded
successfully using the mechanical stir welding process. It was able to weld junctions with full …
successfully using the mechanical stir welding process. It was able to weld junctions with full …
Joining of Thin Plates Using Various Arc Welding Heat Sources–A Review
Advancements and improvements in welding processes are mostly to expand profitability
without losing the nature of the weldment. In order to protect the quality and the cost, using …
without losing the nature of the weldment. In order to protect the quality and the cost, using …