A high-strength low-rare-earth-alloyed Mg− 3.5 Sm− 2Yb− 0.6 Zn− 0.4 Zr alloy was
processed by an ingot metallurgy process with hot-extrusion followed by artificial aging. The …

A new high-pressure die-cast (HPDC) Mg–4Al–3La–1Ca–0.3 Mn (ALaX431) alloy with high
strength has successfully been fabricated. This HPDC alloy in peak-aged state exhibits …

Abstract A Mg-Gd-Y-Zn-Zr magnesium alloy with different initial states was extruded under
different extrusion parameters. The effect of solution treatment and extrusion parameters on …

Abstract A dilute Mg-0.68 Al-0.32 Ca-0.50 Mn (AXM070305, wt%) magnesium (Mg) alloy
with high strength and excellent ductility was developed by extrusion and subsequent T6 …

We have systematically investigated the microstructures of as-cast Mg 97.49 Ho 1.99 Cu
0.43 Zr 0.09 alloy by atomic resolution high-angle annular dark field scanning transmission …

Commercial wrought Mg alloys normally contain low alloying contents to ensure good
formability. In the present work, high-alloyed Mg-6Al-4Zn-xSn (x= 1, 2 and 3 wt …

Abstract Influence of 1.5 wt% Nd addition on microstructures and mechanical properties of
the as-extruded Mg− 6.0 Zn–0.5 Zr (ZK60) alloy was studied. The results illustrate that Nd …

Abstract Influences of Zn, Ca, and their synergistic additions on the microstructures, tensile
properties, and strain hardening behaviors of extruded Mg-1Gd alloy sheets were …

Components and crystal structures of the intermetallic phases in a gravity die-cast Mg− 6.0
Zn− 1.5 Nd− 0.5 Zr (wt%) alloy were investigated using transmission electron microscopy …

Ultra-high frequency (≥ 10 kHz) was employed to produce plasma electrolytic oxidation
(PEO) upon the surface of Mg-8Gd-3Y-0.5 Zr alloy (GW83, in wt%) to understand its …