The aim of this study is to investigate the microstructure and tensile properties of Mg-0.5 Zn-
0.2 Si-XZr (X: 0, 0.25, 0.5 wt.%) in the as-cast and multi-pass friction stir processed (FSPed) …

This work was undertaken to investigate the microstructural evolution, mechanical properties
and fracture behavior of sand-cast Mg-6Gd-3Y-0.5 Zr (GW63) alloy subject to thermal cycling …

The mechanical properties of as-extruded Mg-11Gd-5Y-2Zn-0.7 Zr (GWZ1152) alloy were
systematically studied with respect to their microstructures at room and high temperatures. It …

Microstructures and mechanical properties of Mg–4.5 Y–2.5 Nd–1.0 Gd–0.5 Zr–x Zn (x= 0,
0.5, 1.0, and 1.5; wt%) alloys under as-cast and peak-aged states were investigated in this …

The effects of cerium-based rare earth (RE) addition and hot deformation via extrusion on
the microstructure and mechanical properties of Mg-0.5 Zn-0.5 Zr alloy were studied. It was …

The effect of microstructure evolution on tensile fracture behavior of biomedical Mg-2Zn-1Nd-
0.6 Zr alloy was investigated using OM, EPMA, SEM, TEM, EBSD and Nano-indentation …

A newly developed Mg-4Zn-2La-3Y alloy with high strength was fabricated by high-pressure
die casting method, and its microstructures were thoroughly studied using transmission …

Mg–Al series sheets usually exhibit an apparent mechanical anisotropy induced by strong
basal texture. In this study, a near-isotropic Mg–4.5 Al–1.5 Sn–0.5 Ca–0.2 Mn (ATXM5210) …

The creep behavior of high-pressure die-cast Mg–9Al–1Zn–1Sr alloy was investigated in
detail under temperatures ranging from 130 to 170° C and stresses of 30–80 MPa. The …

Abstract The Mg–5Bi–2Al (BA52, wt%) has shown excellent extrudability despite its high
alloying content. This work is conducted to enhance the strength and ductility of BA52 …