On the Solute Concentration and Corrosion Susceptibility of Mg-xMn-4.0 Gd Alloy
D Gu, W Wu, S Xie, J Peng - Transactions of the Indian Institute of Metals, 2024 - Springer
In this paper, the Fe/Si reduction efficiency, Gd/Mn alloying efficiency, and corrosion
susceptibility of the Mg-xMn-4.0 Gd alloy were investigated. The results reveal that adding …
susceptibility of the Mg-xMn-4.0 Gd alloy were investigated. The results reveal that adding …
The effect of Y/Er and Zn addition on the microstructure and mechanical properties of Mg-11Li alloy
M Zhang, J Zhang, R Wu, H Cui, E Zhao, S Liu, P Qin… - Materials, 2019 - mdpi.com
Although body-centered cubic (BCC) structural magnesium–lithium (Mg-Li) alloys have
lower density and better formability than common hexagonal close-packed (HCP) Mg alloys …
lower density and better formability than common hexagonal close-packed (HCP) Mg alloys …
[HTML][HTML] Effect of Zr Content on the Distribution Characteristic of the 14H and 18R LPSO Phases
W Zhang, Z Feng, X Li, Y Chen - Materials Research, 2020 - SciELO Brasil
Zirconium (Zr) is an essential element in Mg-Zn and Mg-Zn-Y system magnesium alloys. In
this study, an interesting phenomenon that the content of Zr element could influence the size …
this study, an interesting phenomenon that the content of Zr element could influence the size …
Effect of Zn addition on the microstructures and mechanical behaviors of As-cast Mg-2.5 Y-1Ce-0.5 Mn alloy
X Zhang, G Sun, J Liu, C Che, M Yang… - Materials Research …, 2020 - iopscience.iop.org
The effect of Zn addition on the microstructures and mechanical behaviors of as-cast Mg-2.5
Y-1Ce-0.5 Mn alloy was investigated. Microstructure observation demonstrated that with the …
Y-1Ce-0.5 Mn alloy was investigated. Microstructure observation demonstrated that with the …
Effect of Pre‐Extrusion on the Microstructure and Properties of Forged Mg− Al− Zn− Ce Alloy
ZJ Li, JG Wang, RF Yan, Z Wang… - Advanced Engineering …, 2021 - Wiley Online Library
The effects of different morphologies of initial grains obtained by pre‐extrusion under
different extrusion hole diameters or different extrusion temperatures on the microstructure …
different extrusion hole diameters or different extrusion temperatures on the microstructure …
[PDF][PDF] Study of threshold creep behaviour of high-pressure die cast Mg-0.5 Nd alloy.
S Khunfia, M Parida - ijgst.com
Under temperatures ranging from 130 to 170 C and stresses of 30-80 MPa, the threshold
creep behavior of high-pressure die-cast Mg-0.5 Nd alloy was carefully examined. The …
creep behavior of high-pressure die-cast Mg-0.5 Nd alloy was carefully examined. The …
[PDF][PDF] Utilization of Microalloying with Rare Earth Elements and Hot Extrusion for Remarkable Grain Refinement and Enhancement of Mechanical Properties of as …
The effects of micro-addition by rare earth (RE) elements (via cerium-based mischmetal) and
hot deformation (via extrusion process) on the microstructure and mechanical properties of …
hot deformation (via extrusion process) on the microstructure and mechanical properties of …
[PDF][PDF] ULTRAFINE GRAINED MG-ZN-ZR MAGNESIUM ALLOY VIA MICROALLOYING WITH RARE EARTH ELEMENTS AND HOT EXTRUSION
Grain refinement and enhancement of the tensile properties of Mg-Zn-Zr alloy via addition of
rare earth (RE) elements at microalloying levels and utilization of hot extrusion process were …
rare earth (RE) elements at microalloying levels and utilization of hot extrusion process were …
Solidification, microstructure and mechanical properties of mg-nd-gd-zn-zr cast magnesium alloy with yttrium, erbium and samarium additions
AM M Elaswad - 2019 - eprints.uthm.edu.my
The thesis project an investigation the effect of alloying elements Yttrium, Erbium and
Samarium addition on the solidification characteristics, microstructure and mechanical …
Samarium addition on the solidification characteristics, microstructure and mechanical …