The 4th generation of intermetallic γ-TiAl based alloy, the so-called β-solidifying TiAl, has
attracted great attentions due to its promising high-temperature properties. But it is …

Abstract Adding TiB 2 particle to SiC particle reinforced Al composite to form TiB 2-SiC p/Al
composite can increase the tensile properties and lower the thermal expansion coefficient …

Cracking is the critical issue of “hard-to-weld” nickel-based superalloys, especially in the
component fabricated by selective laser melting (SLM). In the work, the cracks of as-printed …

During the fabrication of AlSi10Mg alloys by laser powder bed fusion (LPBF), the high-power
density incident on the melt pool locally results in rapid heating and cooling rates, which …

Despite the high demand for additive manufacturing of high-strength aluminum alloys (60XX
and 70XX), high-strength aluminum alloys are one of the most difficult materials to …

Selective laser melted (SLM-ed) pre-alloyed TiB 2/Al–Si–Mg composite reports tremendous
engineering application potential. However, systematic research on its heat treatment (HT) …

Dry powder coating is used in many industries to tailor the bulk solid characteristics of
cohesive powders. Within this paper, the state of the art of dry coating of feedstock materials …

Additive manufacturing (AM) technologies are being rapidly adopted for producing high-
performance components in industry, and selective laser melting (SLM) is the predominant …

Laser powder bed fusion (LPBF) is one of the most prospective metal additive manufacturing
techniques and has significant advantages over traditional subtractive manufacturing. The …

Given the biomechanical properties (including the elastic modulus and strength) of complex
human service environment requirements for implants, Ti alloy-based implants must exhibit …