The present study, employing EBSD as the primary method, investigates the formation
mechanism of Cube texture components in Ti-22Al-25Nb alloy during uniaxial compression …

This study aims to investigate the distinctive characteristics of a specialized dynamic
recrystallization (DRX) process, which results in a fine and uniform distribution of β grains …

In this work, hot compress tests were conducted at the strain rate range of 1–0.001 s− 1 and
the temperature range of 900–1050° C to unravel the hot deformation behavior of a powder …

Thermomechanical processing is one of the major steps in the fabrication of structural
components used in various engineering applications. The thermomechanical coupling …

Fe–TiB 2 composite shows great potential in lightweight materials for automotive parts due
to its lightweight, high strength and high specific modulus etc. However, challenges remain …

In this study, the continuous dynamic recrystallization (CDRX) behaviors of a hot-deformed
Ti-55511 alloy is investigated in β single-phase domain. CDRX is found to play a dominant …

High-entropy alloys (HEAs) with a face-centered cubic structure offer numerous advantages,
including high plasticity, good processability, and high-temperature resistance. They are …

In this study, we investigated the two-stage deformation behavior of near α Ti-6.5 Al–2Zr–
1Mo–1V alloy at various temperatures (915° C, 950° C, 1020° C) and strain rates (0.01 s− 1 …

The mechanical properties of metastable β-titanium alloys are highly susceptible during the
thermal mechanical processing (TMP). In this process, the recrystallization process plays an …

To address the issue of non-standard grain sizes and difficult control of uniformity in the
manufacturing of large, complex-shaped nuclear power pipelines. In this paper, double …