L Fei, F Jiang, P Zhang, C Chen, Z Zheng, J Li… - Journal of Manufacturing …, 2024 - Elsevier
This study employs two methods, adding a zinc interlayer and increasing rivet length, to mitigate the heat-affected zone (HAZ) of Mg in Mg and steel resistance riviting welding …
D Zhang, X Zhang, W Wang, J Zheng, J Chu… - Materials …, 2023 - Elsevier
Abstract Magnesium alloy and Al-Si-coated steel dissimilar lap joints were joined using the CMT welding process. The weld formation, microstructure and mechanical properties of …
X Liu, Q Lang, J Wang, G Song, L Liu - Materials, 2024 - mdpi.com
Mg alloy AZ31B was directly bonded to SK7 with a low alloy content, DP980 with a high Mn content, 316L with a high Cr and high Ni content by laser-gas tungsten arc welding (GTAW) …
The ferrous deuteroporphyrin cast Fe alloy and nickelcoated steel were lap welded successfully using the mechanical stir welding process. It was able to weld junctions with full …