In order to investigate the effect of grain size on the fatigue limit of single-phase equiatomic
high-entropy alloys (HEAs); CrMnFeCoNi, fabricated by spark plasma sintering, four-point …

Abstract CoCrFeNiMnTi x (x= 0.1 and 0.3) high-entropy alloys (HEAs) were processed by
thermomechanical treatment including heavy cold rolling followed by post-deformation …

In traditional physical metallurgy, once recrystallization occurs, it will proceed to 100% along
with time even at relatively low temperatures, resulting in the limited thermal stability of …

High-cycle fatigue tests were performed on differently deep rolled conditions of the
equiatomic high-entropy alloy (HEA) CoCrFeMnNi. Twinning in the near-surface layer of …

The microstructure and mechanical properties of the as-cast (Fe 50 Mn 30 Co 10 Cr 10) 100-
x C x (x= 0, 0.5, 1, 2, 4, 6 at.%) alloys have been investigated. The results show that at x= 0 …

In this study, CoCrFeMnNi high-entropy alloys (HEAs) with a surface gradient nanostructure
were produced using industrial shot blasting, which improved their mechanical properties …

In this study, we examined the effect of deformation twins and dislocation cell structures on
the fatigue properties of the CoCrFeMnNi high-entropy alloy using rotational bending fatigue …

The effect of Si content on the tensile and cyclic deformation behavior of Fe 50-x Mn 30 Co
10 Cr 10 Si x (x= 0–6) as a metastable high-entropy alloy (HEA) was investigated in this …

Fatigue failure of metallic structures is of great concern to industrial applications. A material
will not be practically useful if it is prone to fatigue failures. To take the advantage of lately …

Abstract High-entropy alloys (HEAs), which comprise five or more elements and have an
equiatomic composition, are known to exhibit superior static strength and ductility. The …