In this paper a physical-based constitutive relation for defining the thermo-viscoplastic
behaviour of FCC metals with dependence on strain on thermal activation processes is …

The dynamic tensile behaviour of a type of twinning induced plasticity (TWIP) steel was
experimentally investigated over a wide range of strain rates from 0.001 to 400s− 1, with an …

The purpose of the present paper is to investigate the mechanical behavior of mild steel at
quasi-static (0.001 s− 1) and different rates of dynamic tensile (5–750 s− 1) and compressive …

In this paper, research on dynamic behaviors of RC structural members was reviewed using
experimental, theoretical and numerical perspectives. First, in a basic overview …

Thermomechanical behavior of tungsten-based composite 93W–4.9 Ni–2.1 Fe is
investigated systematically over strain rates ranging from 0.001 to 3000s− 1, and …

This paper deals with the mechanical behaviour of the aluminium alloy 2024-T3. This alloy
has particular relevance since it is widely used in the aeronautical industry for building …

The reinforced concrete beam-column joint exhibits different properties under dynamic
loading when compared with that under quasi-static loading, due to the effect of strain rate …

Current needs in the design and optimization of complex protective structures lead to the
development of more accurate numerical modelling of impact loadings. The aim of …

Applicabilities of several well-known constitutive models for BCC metals have been
reviewed in detail previously (Modelling Simul. Mater. Sci. Eng. 20 (2012) 015005; Acta …

The effect of strain rate and temperature on the thermomechanical behavior and
microstructure of MarBN steel is studied with the strain rates of 5× 10− 3 and 5× 10− 5 s− 1 …