In the current study, the effect of P2O5 on the mechanical properties of porous natural
hydroxyapatite (NHA) derived from cortical bovine bones sintered at 1,050° C is assessed …

SiC-based ceramic membranes are promising materials for gas/solid filtration in industrial
applications, but they are limited by their low gas permeance. Herein, considering the similar …

Three porous ceramic composites were prepared from readily available raw materials
(kaolin, bauxite, feldspar and kyanite). The porous ceramic formulations were sintered at …

The porous anorthite ceramics with high porosity, good mechanical strength and low heat
conductivity were prepared using red mud and fly ash as raw materials via the pore forming …

Due to its close physical and chemical properties to the mineral part of bone and teeth,
hydroxyapatite (Ca10 (PO4) 6 (OH) 2) is one of the most attractive materials for human hard …

In this contribution, we presented a systematical investigation and prepared partially vitrified
ceramic foam materials using polymetallic ore tailings (POTs) and other waste as raw …

The use of ceramic membranes has many advantages, such as high thermal and chemical
stability, pressure resistance, long lifetime, good resistance to fouling, and the ease of …

As the environment deteriorates, recycling of solid waste has become increasingly
important. This study aimed to optimize the use of the Fe2O3, SiO2, and CaO components in …

Fly ash is an aluminosilicate and the major by-product from coal combustion in power
stations; its increasing volumes are major economic and environmental concerns …

This study focuses on recycling of different industrial wastes as silica fume and waste clay
for production of structural sintered alumino-silicate ceramic bodies. These wastes are rich …