… patch antenna on FR4 substrate were presented in this study. Accurate electrical characterization
of the FR4 substrate in … A proximity L-probe-fed structure and parasitic patches were …

… square patch antenna designed on a glass epoxy FR4 substrate (1r ¼ 4.37, tan d ¼ 0.025,
substrate thickness h ¼ 0.158 cm) with copper as its ground plane [14]. Patch dimensions are …

… substrates to fabricate microstrip patch antenna. So a question arises that which dielectric
substrate among the common substrates … Triangular microstrip patch antenna with FR4 Glass …

The main aim of this paper is to design a compact Microstrip patch antenna for wireless
applications like Wi-Fi, WiMax, WLAN and Satellite Communication. A software simulation was …

… patch antenna and compares the basic antenna characteristics with three different substrates.
… are applicable to a patch antenna. Then the return loss and VSWR value for three different …

… different dielectric substrates for small size microstrip patch antenna have been examined.
Performance evaluation and comparison between FR4 and Rogers substrate materials has …

… performance of a square patch antenna with two nothes on its opposite edges is considered
and is compared with a normal square patch antenna. The antennas are simulated using …

… a wearable microstrip patch antenna design. The main … patch antenna using the FR4
substrate material covered by the jeans fabric as the outer layer. The FR4 microstrip patch antenna …

… In this study, FR-4 with a dielectric constant of 4.3 was selected as a dielectric substrate and
its height was 0.1 mm. According to these values and the resonant frequency of 28 GHz, W …

… In this paper, a triple frequency band patch antenna has been proposed on FR4
substrate material. The antenna is designed on 40 mm×40mm printed circuit board. The …