This study investigated the effects of Ca addition on microstructural characterization and
wear behavior of Mg-2Zn-2Ce alloy. The results show that the formation of sub-micron-sized …

The effects of heat treatment on microstructures and hardening response of Mg–6Zn–0.5 Er–
0.5 Ca (wt%) alloy were investigated by optical microscope (OM), scanning electron …

The wear behavior of Mg–1.5 Zn–0.15 Gd alloy before and after cryogenic treatment (CT)
has been investigated by dry sliding wear test and scanning electron microscope (SEM) …

Abstract Effects of various Gd additions on the microstructure evolution, tensile properties
and corrosion resistance of Mg–6Zn-0.5 Ca–1Mn (ZMX6105) alloys were investigated …

In this paper, the effect of adding 1.0 wt.% Ce on the as-cast microstructure and mechanical
properties of the Mg-3.8 Zn-2.2 Ca (wt.%) magnesium alloy were investigated. The results …

The wear behavior of an as-received Mg-Zn-Y-Zr alloy before and after a facile heat
treatment was investigated under sliding in air and 0.5 wt.% NaCl solution. Results revealed …

Dry sliding wear tests were performed on a Mg–10Y–4Gd–1.5 Zn–0.4 Zr alloy using a Ball-
on-Flat type wear apparatus against an AISI 52100 type bearing steel ball counterface. The …

The effect of microalloyed Ca on the microstructure, mechanical properties and aging
precipitation of Mg–6Zn–1Mn–4Sn (wt.%, ZMT614) alloy were investigated. The as-cast …

The effects of Zn content on microstructures and mechanical properties of Mg–Zn–RE alloys
have been investigated. The results indicate that RE-rich phases will change from the MgY …

In this work, the effect of Gd on the microstructure evolution and mechanical properties of Mg–
4Zn–0.6 Ca–xGd (x= 0, 0.3, 0.6 and 1, wt%) alloys were investigated systematically. The …