The mechanical properties of the austenite and ferrite phases in a high Cr content 2205
duplex stainless steel (DSS) have been investigated using single crystal micropillars of size …

The mechanical properties of individual constituent in a cast austenitic–ferritic stainless steel
were studied using uniaxial micropillar compression tests. The results of compression tests …

Cast duplex stainless steels (CDSS) were investigated in order to understand the
mechanical properties of their individual constituents, ferrite and austenite, after thermal …

A notable discrepancy in tensile ductility was observed between two 2205 duplex stainless
steels (DSS) containing layered and island-like austenite microstructures. The deformation …

The deformation behaviour of the austenitic and ferritic phases in an aged duplex stainless
steel is investigated experimentally and numerically. The effect of the ferritic phase's …

The evolution of deformation during monotonic and cyclic loading of a two-phase material
like duplex stainless steel is more complex than in a single-phase material. One reason for …

In this study, the microstructure dependence of impact toughness was studied for a 2205
duplex stainless steel in the temperature range of− 196 to 25° C. Three markedly different …

Micropillar compression has become an attractive method to probe local mechanical
behavior. While most micropillar compression work has focused on investigating size effects …

The tensile properties of 22Cr–2Ni–4Mn–0.2 N micro-duplex stainless steels with different
Ni and Mn contents were investigated. Duplex stainless steels were vacuum induction …

The austenite and ferrite microstructure evolution and restoration mechanisms were studied
during hot uniaxial compression of a 23Cr-6Ni-3Mo duplex stainless steel with two markedly …